Question about Panasonic KX-T7730 Corded Phone
Either button mapping or no dial tone at the system cabinet. If your desplay sas CO1 and you have no dial tone, go to the sytsem cabinet ans swap the modular plugs for CO1 and CO2. If the No Dial Tone moves, "mus be sumpin wrong wit yo lines".
Posted on Aug 13, 2010
The blinking light on the speaker button means the forward when busy is on. To cancel it- With the handset on-hook dial #12.
Then press your own station number. Then dial # again. The speaker button should stop flickering.
Note: If the SPK button continues to flicker, Forward all is activated. It is the same process as above but use #11 instead of #12
Posted on Mar 12, 2008
What you need is a dsl filter since you are working off a splitter. You can usually get these for free from your phone company.
Posted on Mar 20, 2009
Try the simple things first. Try a different phone. In my case, I had the phone company check - outside was fine. After two hours my phone worked. I figured out what happened in my case. Both phones were dead (battery). I think one died with the phone off the hook. once the phones were fully charged, the phone worked.
Posted on Mar 29, 2010
Tips for a great answer:
Oct 19, 2014 | NEC 22b Hf Aspirephone-bk Stock No....
Jul 19, 2012 | Panasonic KX-T7433B Corded Phone
Jul 05, 2011 | RCA 25415RE3 Phone
Dec 08, 2010 | Uniden Cordless Phone
Apr 21, 2009 | Uniden Cordless Phone
Mar 13, 2009 | Mitel 5220 IP Phone
May 01, 2008 | Panasonic KX-FM220 Plain Paper Thermal Fax
Nov 24, 2007 | RCA 25202RE3 Corded Phone
Mar 07, 2007 | AT&T Spirit 6-Button Stard Misty Phone
720 people viewed this question
Usually answered in minutes!