IS THERE A MULTI-REGION HACK FOR THE ONKYO DV-BD507?, IF SO HOW DO I DO IT.

try these codes.
30503, 30612, 30627, 31612, 31627
If not, re-post.

Hi,
Please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay__yhdtg453e

Hello, please get the code here : www.regionfreedvd.net/ www.dvdripper.org/dvd-region-codes-vs-ntscpal/ www.regionfreedvd.net/players.html
www.dvdreviewer.co.uk/Forums/...region_code/page1
Best Regards, Jay_4vbn89

My onkyo DV BD-507 only play dvd disc, and dosent play blu-ray disc

There is no need for region hack on this unit. It plays region free and all PAL dvd's out of the box without reprogram.

If you mean to play DVD’s that you may have purchased in another country the see below

For that you need to do a Google for "mymodel region free" or "region free hack"

Not all DVD players are capable of this often very simple modification that many manufacturers build into DVD player. (Usually just involves the remote control and a combination of keys)

Your search will turn up a lot of sharks that want money for the hack (fix)

IGNORE THEM

There are a lot of sites where the information is free.

I am STILL (lauren) unsure of FIXYA's policy on this topic and am awaiting further clarification on the issue with regards to handing out these codes as this is not HACKING in the same sense as pirate software etc. it is just enabling an extra feature that the manufacturer provided.
I would prefer not to get my @ss kicked. That is why I can only give you the search terms rather than site links or specific information

Region code hack posted by Victor Lazlo, July 14 2003:
Steps to change Region code:
1. open setup menu (with setup key)
2. select menu point 'General' (dt. 'Allgemein')
3. select sup-menu point 'Setup-Menu Mode' (dt.Setup-Menü-Modus)
4. at 'Setup-Menu Mode' select 'basic' (dt. Einsteiger)
5. confirm 'Basic' sellection with 'Enter' key
6. now push 'Display' key at your remote control, the present regent code will be displaid
7. to change the region code push 'Condition Memory' key (COND.M) at your remote control, afterwards a number key representing the region code you want to select
8. after a successful change, the disply of ther regional code will disappear
9. if pressing the 'Disply' key again the changed regional code will be shown.

Remark: Macrovision copyguard in gerneral will be switched off after that modification

refer to:http://www.videohelp.com/dvdhacks

You need to hack the dvd reinstalled firmware, I can see if I find hacked firmware for your dvd

Multi-Region Hack:

Press the Open button on your Onkyo DVD-player to Open the drive tray.
Using the remote press 9, 9, 9 and 9 on your remote control.
Press the 1 button on your remote control for region 1, 2 for region 2, and so on, or 9 for multi-region.
Press OK and the tray will close.
Reset the unit by powering Off and then back On again.

http://www.dvdexploder.com/multihacks.htm

http://www.videohelp.com/dvdhacks