How do you shut off the automatic scroll pad? I'm assuming that's what it's called - it's on the right side of the mouse; 3 verticle lines and when you run your finger up and down it, the page scrolls up and down. I hate this feature - it's too close to my hand and I'm always hitting it while I'm typing and the page will shoot up (or down).

restart your computer
or go into control panel the find mouse and settings,your pad might need replacement

1-turn mouse on back
2-there is a cover that holds the roller in place turn and remove
3- put roller and cover to the side
4-look inside there is a wheel and a bar
5-on the bar you will see some accumulation of dust and string, hair etc...
6-remove with eyebrow remover
7- put back roller and cover

To access Mouse Properties, select Start - Control Panel - Hardware and Sound -Mouse.

Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options.

The verticle scroll can be done in two ways. Using the mouse to point over the scroll bar. Left click and hold the left mouse button and drag your finger up or down across the touch pad. The second way is to trace a circle around the outside of the touch pad.

I hope this information was helpful. Let me know if you need any further clarification.

I have attached a link to the panasonic manual download page for your toughbook. You can download the operating instructions booklet to see more information about your toughbook.

Brian

http://www.panasonic.com/business/toughbook/computer-support-download-manuals.asp

Go to control panel -> Mouse -> "Device Settings" tab (has the synaptics logo to the left of it) -> Select your touchpad -> "Settings" -> expand "Scrolling" -> "One-finger Scrolling" -> uncheck "Enable Vertical Scrolling" and also uncheck "Enable horizontal scrolling"

If you don't have "Device settings" in the mouse setting window, then you need to install the drivers from http://www.synaptics.com/support/drivers

Sometimes there is a setting, under mouse, in the control panel. But also there is a time based issue, you need to stop while pressing in the scroll area, and the mouse shifts from mousing to scrolling. Duration of time, and first touch to the pad in the scroll area are keys.

bad mouse action , no other words need be said just that.
NO OP SYS STATED BY YOU< XP?
if the mouse is a wireless mouse, the battery is dead.
if the 1 mouse is wired it is bad.
if there are 2 mice connected , shut one down 2mice not allowed.

if the mouse pad is enabled then that is 2 mice if usb mouse used.
and not ever good to do that,
disable one of the mice. (easy no? rules)
i disable my LT here, , in control panel, device manager , mouse pad synaptic or what ever it is.
RC right click disable, it , I hate mice pads././/

Hi,

1-Firstly you go to system control panel(Start button->setting->Control panel)
2-select the mouse option and click
3-you see the 5 option under it,select the pointer options
4-under the visibility option unmark Display pointer trails &
Hide pointer whilt typing option
and also check the pointer speed option under pointer option.
5-than ok..

Thanks,

you may be able to fix this by going to control panel and then mouse settings
you also may want to check your driver by right clicking my computer properties hardware then device scroll down till you find your mouse thrn right click and update driver

Go into your control panel (if your on windows). Load the mouse settings control. You can customize the features of your touchpad.