Question about Maytag Neptune MAH6500A Front Load Washer
I had a Maytag washer almost 5 years old that sounded like a Jet Engine taking off during the spin cycle. It was the Tub Bearing - there are kits to do this yourself. To hire someone it would of cost almost as much as it would be to buy a new Washing machine. Never again Maytag - it was whats inside that mattered so I bought an LG washer.
If you let it go too long your going to wind up flooding underneath the washing machine with Brown gunk
I’m happy to help further over the phone at https://www.6ya.com/expert/charles_6bf94c079488b145
Posted on Apr 02, 2015
The problem is that the seals are leaking and allowing water to attack the tub bearings.
You need new tub seals and bearings.....not as difficult as it may seem.
see u tube video on replacing maytag seals and bearings
Posted on Mar 08, 2015
SOURCE: loud noise during spin cycle
this is my experience repairing the maytag washer Atlantis mav series 9750 aww, I had to replace the spin bearing since it was making a jet engine noise when it was spinning out the water. its not an easy job for my 1st time taking this machine apart, you literally take it all apart to get to this bearing, but now I can show how to do it with pictures making it easier for you to do it. even if you have to replace something other than the spin bearing, this how to tutorial will show you how to get to most of the parts in this machine
tutorial located here tutorial located here https://sites.google.com/site/maytagwasherrepair/maytag-washer-repair
Posted on Apr 08, 2008
SOURCE: rattling noise during spin cycle
from a washing machine occur during the spin cycle. If you hear loud
thumping during the spin, the load of clothes may have become
unbalanced. Stop the washer and redistribute the clothes, then re-start
it. Repeat these steps if necessary.
Posted on Nov 12, 2008
Tips for a great answer:
Nov 18, 2017 | Washing Machines
Dec 03, 2015 | Washing Machines
That's a great question, Roth!
Based off the information you have provided your Frigidaire washer is making a loud noise during the spin cycle. This could be an issue with your bel, motor, or tub. In order to find the cause of your noise you may need to disassemble your washer. This is not a simple DIY job and I would recommend contacting a technician to come out. This will help prevent any future issues or personal injuries. -Matt
Mar 11, 2015 | Frigidaire GLTF2940ES Front Load Washer
Dec 12, 2009 | Kenmore Washing Machines
Oct 09, 2009 | Fisher and Paykel GWL11 Top Load Washer
May 02, 2009 | Washing Machines
Nov 12, 2008 | Maytag MAH2400A Front Load Washer
Apr 11, 2008 | Washing Machines
Usually answered in minutes!
Step 2: Please assign your manual to a product: