Mintec 1760 dvd not detect any discs

Nowhere! It is a bin-job. Even the manual has no maker details.

https://www.google.com/search?q=mintec+mdp-1020+dvd+player+parts+diagram

Purely to show hidden maker details. Not your model

https://www.manualslib.com/manual/507494/Mintek-Mdp-1760.html#manual

..

No disc is usually a dirty or bad optical pickup unit. On a portable unit it usually is cheaper to just buy a new one.

Hi. From what you describe it sounds like the spindle, the part you clip your disc onto, has been pushed down too far and needs to be pulled back up a touch, 2mm approx. Image for clarification only.

best bet is to buy a new one . repairs to the laser if you can find one will cost as much as the unit did . buy a new one

problem on laser or laser active switch . Replace it.

when I put in a disc it says it's loading, however it keeps showing "no disc"

I have the same player with a similar problem, though the cable is not broken on mine as far as I can tell.

When I put in a disc and close the lid, I can hear the disc spin and the drive seek, but after about 30 seconds, it always shows "NO DISC" in the upper-left area of the screen. I used to use it daily to listen to MP3 audio books on my 45-minute-long drive to and from work every day and I'd occasionally watch DVDs at lunch, but now it does not read any type of disc at all.

After I did a Google search, it seems that Mintek's products are pretty crappy overall and the worst part is that Mintek now appears to be out of business. Their web site, www.mintekdigital.com is now completely gone and there is no current contact information.

It's too bad because I really did like the player's capabilities and relatively long battery life. It came with a remote, a wall charger, a car charger, (cheap) headphones, and a video out to composite video cable. Before I used it on my drive, my son used it in his room because we didn't have a second DVD player and it worked great for him then too.

1. POWER ON

2. PRESS ‘SET-UP’ BUTTON

3. SELECT THE ‘PREFERENCES’ MENU (PRESS CENTER ARROW BUTTON THIS IS THE ENTER BUTTON)

4. INPUT THE PASSWORD CODE 224455

5. PRESS ‘LEFT’ AND ‘DOWN’ BUTTON (NOW THE SCREEN WILL SHOW ‘REGION CODE 1’)

6. PRESS NUMBER BUTTON (2 TO 6) TO CHANGE ZONE. (TRY 10/0 BUTTON FIRST, IF ACCEPTED THEN PRESS SETUP, YOUR PLAYER IS NOW REGION FREE)

7. PRESS ‘SETUP’ BUTTON TO EXIT.

My Mintek MDP-1760 try to loading the dik and later show a mesage NO DISC... what is the proble?

You may be able to have this one serviced, but it also may be time for replacement, as the repair cost are rather high...accordianman