Cs pro 5000

Sir/Mam,
C-0000 is the code for the Main motor something is preventing it from turning more then likely in the fusing section the hot part. Or the motor is already burned out or the Printed circuit board that controls it. open and close the front door to reset.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Pease the error code.

Could not find that code in the service manual how about C0000 or c-0010

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

CO 610 lens motion failure.Check or replace the lens reference position sensor or correct or replace the cable or part being overloaded.

Please deescribe your roblem/reset the malfuntiion code open and close the front door or turn OFF the power witch and tray again to turn .

Please clean the mirror unit,the trasfer and separator coronas,and perform F5 AIDC control.

C-05 Error code occurs on fuser unite.
When it display open back cover and press reset button.
Machine ready.If are not fix this problem.May be change or replace thermostat or lamp fuse.

can you confirm the the code for me?is it co5o cod ?

clear web or drum count and developer,you will not effect the the machine aporation,by clearing count

sorter problem