Question about Balance CM2017 17" Monitor

1 Answer

Not all colors and images show on monitor

HI, Not all the colors show on my monitor and sometimes images don't show up either, but if you run the mouse around on the screen the arrow turns to a hand so you know there is something there. I have a Balance fla panel monitor. Any help will be greatly appreciated. Thanks

Posted by sfisher48 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Sounds like the speed optimizer either from AOL or in your browser settings that is not allowing your "Pictures" to be downloaded and seen. Try turning off the speed optimizer in aol or reinstalling the drivers for the Video Adapter. To do that right click my computer/left click Properties/ left click hardware/ left click device manager/ left click the small plus box in the display adapter/ highlight the display adapter and click update driver in the upper icon box. When the option comes up use the bottom option select a driver myself, click the bottom option again and select it from a list, then install the one that comes up in the white box. that will reset the video driver to the default settings. Hope this helps. Chuck [email protected]

Posted on Jul 25, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor switch always return to Sleeo Mode


You can open the VGA cable and connect it again, sometimes there are two or three vga ports behind your cpu, connect the right one. Try it, if not success, change the cable.

Mar 11, 2017 | LG W2252TQ Monitor

1 Answer

Acer aspire 6930 LCD replacement is foggy and distorted


hate to say this but it sound like you need another screen replaced

Jul 29, 2012 | Acer Aspire Computers & Internet

1 Answer

Dual screen wont work


Kevin,

1) You cannot plug a monitor into the VGA connector, on the back of the desktop computer, AND plug a second monitor into a DVI connector, on the back of a desktop computer.

In otherwords you can only plug ONE monitor into the motherboard.

[ The I/O area on the back of the desktop computer, is the Input/Output area. This rectangular area has connections for Input devices, and Output devices.

Examples such as a Mouse, Keyboard, (INPUT), VGA devices, (VGA monitor - Output), USB devices, audio devices, (Speakers - Output. Microphone is an Input device), and so on.

The I/O area has a rectangular metal shield. (Thin metal plate)

Connecting a device in the I/O area, is connecting it directly to the motherboard.

Example of a VGA connector, and VGA cable,

http://en.wikipedia.org/wiki/VGA_connector

Example of a DVI cable, and DVI connector,

http://en.wikipedia.org/wiki/Digital_Visual_Interface

(There are several variations of DVI connectors.
Scroll down ]

To use dual monitors you need a graphics card also.
Graphics card with a VGA connector, or DVI connector. (Or both)

Monitor with VGA cable, plugs into the I/O area on the back of the desktop computer. (Plugs into the motherboard's graphic chipset)

The second monitor plugs into the graphics card's DVI connector, or VGA connector.

[ Just an example,

http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1416091&CatId=3669

On the image of the graphics card on the left;
Go under it to the subheading - + 11 larger images and views.

There are 7 views shown. One is the carton the graphics card comes in. (View 2 from the left)

Going from the left side, count over to the 5th view. Left-click on the 5th view. Shows you the 'business end' of the graphics card.

Starting at the left side it is the HDMI connector, then VGA connector, then DVI connector.

Note*
YES, you can plug a VGA monitor, AND a DVI monitor, into this type of graphics card, and have Dual monitors ]

FIRST:
Computer on, Windows running; Put the Installation disk (CD) in the optical drive's tray. (CD/DVD drive)
Load ALL software.
Drivers, and 'Control Panel'.

Graphics card software loaded, close all windows, go back to your desktop screen. Turn the computer off normally.

Unplug the computer from power. Open the computer case.
FOLLOW Anti-Static Precautions.
(Don't know Anti-Static Precautions? Post back in a Comment)

Physically install the graphics card. Close the computer case.
Plug the VGA cable of the Primary monitor, into the VGA connector in the I/O area, on the back of the desktop computer.

Now plug the DVI cable of the Secondary monitor, into the DVI connector on the graphics card.

(The main monitor you use is the Primary monitor. The second monitor you are going to add, is the Secondary monitor )

Plug the computer into power. Both monitors plugged into power, turn them BOTH on.
Turn the computer on.

When Windows loads you will see a display on the Primary monitor.
Your desktop screen.

Now Right-click on an empty area of your desktop screen.
In the list at the bottom, Left-click on - Properties.

In the Display Properties window that comes up, left-click on the -
Settings tab.

You will see two rectangular icons. 1 and 2.
1 is the Primary monitor. 2 is the Secondary monitor.

Left-click on the Secondary monitor icon.
Go down towards the bottom/middle on the left.

Left-click in the empty square to the left of -
Extend my Windows desktop onto this monitor

Go down to the bottom Right. Left-click on Apply.
Go down to the bottom Left. Left-click on OK.

Your desktop screen will now be on the secondary monitor.


When you open your internet browser, (Yahoo, or Google, or MSN, or Mozilla Firefox, etc), you have to DRAG the screen onto the secondary monitor.

(Let's use Yahoo for an example. Yahoo will be on your Primary monitor.
You need to drag Yahoo onto the Secondary monitor)

Which direction you drag, is up to which direction the two monitors are sitting, on your computer desk.

The way the monitors are sitting in Display Properties; the Primary monitor is on the Left. ( 1 )
The Secondary monitor ( 2 ) is on the Right.

This is the way the two monitors should sit on your computer desk.
(There is a way to switch them around, however)

On your Primary monitor, (Still using Yahoo as an example), go to the RIGHT side. See the blue frame going around the screen?

When you bring the mouse cursor ON the blue frame, it turns into a Double-Sided arrow.
It is difficult at first to keep the cursor as a double-sided arrow.

Move too far to the right, it turns into the usual pointed cursor.
Move too far to the left, and it turns into the usual pointed cursor.
have to keep it on the blue frame.

WHILE the mouse cursor is a Double-Sided arrow, left-click, and hold the left mouse button down. Now drag the screen to the Right.
(Move your mouse to the right)

Keep dragging until the Yahoo browser is on both monitors.

Different size monitors? The display will not be the same size, on both monitors.

[ I use an HP 2009m, 20-inch widescreen monitor, as a Primary monitor, and an RCA EN-V, 26 inch HDTV, as a Secondary monitor.

I have my desktop on the Primary monitor, and FixYa, (Firefox browser), on the Secondary monitor, right now ]

If this is not your problem please state in a Comment.
Also state additional questions in a Comment.

Regards,
joecoolvette

May 10, 2012 | Computers & Internet

2 Answers

Can i connect two monitors to a nvidia geforce 315 card so as too use two monitors


hi,
yes the 315 desktop card does have multi monitor support. you may however need an adapter for one monitor as it only has one dvi ,one hdmi and one vga.
so you can hook up any 2 as a combination but they have different plug configurations to do this
GL
hope this helps

Don't forget to vote for me
Thank You
Jammer

Sep 16, 2011 | Computers & Internet

1 Answer

Can't see my tool bar


Not much information to go on but there are a couple things you can try...

First try changing your monitor resolution to its optimal resolution (having the wrong one set can stretch the screen so the toolbar doesnt show up)...if you are unsure how to do that or what your optimal resolution is post your monitor and its size and I can tell you.

Second, try moving the mouse cursor (the little arrow) to the very bottom edge of the screen and very slowly move it around...if at ANY point it changes into a thinner pointer with an arrow at both ends click and hold the left mouse button and drag up and release when the toolbar is visible.

Let me know how that works out.

Feb 17, 2011 | Computers & Internet

1 Answer

My Monitor suddenly changed and shows vertical position,even mouse arrow is pointed to west, instead of the normal north positioning


Hi,

To restore the monitor or the screen to the original upright position, kindly press these three keys together:

ALT CTRL UP arrow key.(See attached image)


803f543.png

Hope this solves your problem. Thanks for using FixYa.

Jun 18, 2010 | Samsung SyncMaster 753S 17" CRT Monitor

3 Answers

Envision monitor EN-7100e color is screwd up.


Unfortunately this monitor has captived VGA cable, you cannot easily replace it. Try moving the cable around to see if you will get normal color back.
http://ec1.images-amazon.com/media/i3d/01/A/man-migrate/MANUAL000001218.pdf

http://s807.photobucket.com/home/budm/allalbums

Apr 12, 2010 | Envision EN-7100e 17" Flat Panel LCD...

1 Answer

Kds model 780 monitor no signal, power button does not work


My monitor does the same thing at times and sometimes shows "No Signal" and at other times the screen will maintain the images but the backgound color switches to mustard yellow. In each of these cases I have been able to solve the problem by unplugging the power cord from the electical outlet for about three seconds and plugging it back in. I have a KDS model 780 LCD.
GOOD LUCK

Dec 15, 2008 | KDS Radius RAD-5 15 in. Flat Panel LCD...

2 Answers

Monitor won't stay on


Your computer may be in screen saver mode, it has instructed the monitor to go to power saving mode, or the the monitor's video cable is not properly connected to the computer. Another possible cause of this is a locked-up or in-operative computer since the computer is what supplies the monitor with all the display data or information. Move the mouse or press a key to de-activate the screen saver or power saving mode. Check the monitor's video cable and make sure it is snugly connected to the computer. To see if the computer is operating properly, press the CAPS LOCK key on the keyboard repeatedly while checking the CAPS LOCK light. If the light is not turning ON & OFF, the computer is non-functional. Contact your computer manufacturer for help.

Dec 02, 2008 | Computers & Internet

3 Answers

How do I get the widescreen monitor to show unstretched images?


i had the same problem with my new widescreen monitor... turns out the best setting (at least, for my specific monitor) was 1440 by 900 pixels. at this setting the desktop still stretches itself to fill the entire screen, but everything else is completely unstretched. (to adjust the screen resolution, right click anywhere on the desktop, then go to properties, then settings.)

Nov 07, 2007 | Gateway FPD2275W LCD Monitor

Not finding what you are looking for?
Balance CM2017 17" Monitor Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Balance Computers & Internet Experts

Brad Brown

Level 3 Expert

18360 Answers

Vernon Taylor

Level 3 Expert

6553 Answers

The Scrivener

Level 2 Expert

160 Answers

Are you a Balance Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...