Use a putty knife at the base of the control console about 2 inches in from the right and left sides.
Lay the putty knife flat on the top of the washer and push it in under the front corner of the control console to depress the clips on the right and left side.
Then fold the control console panel towards the rear of the washer.
Then you can see the cord and how it attaches.
The cord part number is 285800 and cost about $30.00.
Testimonial: "Worked like a charm, and part # was right on target. Thanks a lot. Now if only Sears parts web site was that squared away!"
263 views
Usually answered in minutes!
×