Vw polo beta radio doesnt unlock after entering right code 1999 year

VW service ;(

IMPORTANT NOTE: You must have the security anti-theft code for your Beta radio from the car manufacturer, or from a VW dealer!

The sequence of programming for 1999 VW Passat - Beta radio is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt. Your code is "0832". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 9 times on the no.# 1 button. The "0" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 8 times on the no.# 2 button. The "8" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 3 times on the no.# 3 button. The "3" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 2 times on the no.# 4 button. The "2" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed. The radio is now ready for use!

Please do rate my response. Thanks!

if the wrong code or the battery has been disconnected then you will need to leave the radio switched on for 24 hours BEFORE you try to enter the correct code.(your allowed 3 tries before it shuts down again)

VW Blaupunkt codes are not available for free from anywhere on the Internet.

Only available from your VW DEaler or a Radio Decoding Service

Probably depends on the year/model of the VW. For a 1999 through 2002 Cabrio, you would need to do this: obtain the unlock code that was shipped with the vehicle. If you don't have the unlock code, your local dealership can pull the radio and look up the code with the serial number. Once you have the unlock code, then turn on the radio. You should see SAFE displayed. After about 3 secs, "0001" should appear. Use the station preset buttons 1 through 4. Preset 1 changes the first digit of the code, and preset 2 changes the second digit, etc. Enter all 4 digits of the code. After code is entered, press right side of "Seek" button for about 2 seconds, until an audible signal is heard. If you hose up and get the wrong code...will go back to SAFE displayed. You will get another chance to enter the code. After 2 failed attempts, you have to wait 1 hour again for it to unlock. So carefully enter the correct code the first time.
Volkswagen uses the radio lock feature to prevent unauthorized users of your audio system and will not allow your radio to operate without the proper unlock code.
Volkswagen began using the anti theft feature around 1990 and is still in use in most Volkswagen vehicles today!
Step 1 - Retrieve radio serial#
Your vehicle requires that you remove the radio from the vehicle in order to retrieve your radio's serial number.
Number will start with vwz.Must be a 14 digit number.You must include all numbers and letters included in the radio serial#, including "vwz". Radio serial# Found on chassis of vehicles radio. You must remove the radio from the vehicle in order to retrieve the radio serial number. This number may be stamped in the metal, on side of radio.

Step 2 - Retrieve vehicle V.I.N #Vehicle identification number.Usually found at the bottom of drivers side window.
Step 3 - Purchase code at

http://www.radio-code.com

• You will receive your radio unlock code, via email.
  
  
• Approximate code retrieval time is 30 minutes to 24 hours.
  

To do it yourself you will need to have the radio removal keys to unlock the radio compartment .
look at this site and you will have an idea :
http://forums.vwvortex.com/zerothread?id=967146

i need code for radio cd blaupunkt (fiat punto cd)

bp no :7642375316

product no: 735337934

is bp code is:237534139299 my email is [email protected] plz urgent plzzzzzzzzzzzzz

I left my radio on for one hour, then re enter the code (the one I was trying to enter was the wrong one). Radio is working well.
Thanks

For this code you most likely would have to get it from VW. Unless you get lucky and fine it on the internet. There is a good site to fine that can off stuff just look up the web site scribd.
Hope that this helps.

Cheers

To switch the system on, push the button left. When blue background light appears with the word "Safe" en ter your code. Example: code is 3527 push button nr1 3x, button2 5x, button3 2x and button4 7x. Confirm by pushing button 8 or 9. When the correct code is entered the system will go in operational mode. If the incorrect code is entered "Safe" will appear again. Good luck.

****