Need code for a Durabrand on urc3605 one for all remote.

To select a proper universal remote control, you should know about the number of digits to its set-up codes.There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices.After confirming this, check the sites linked here.Both the sites have set-up code list and set-up procedure to many popular brand remote controls.Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability?Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack.Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/Check this site too.http://remotesearch.blogspot.com/Universal remote controls are available at most of the electronic spare part selling shops.Visit some online sites too, which deals with electronic spare parts.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand.They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.

0185,0188,0184,0183,0180. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=oneforall&dv=universalremote&kw=&st=&ar=&dt=&so=&au=&le=&pg=2
Perhaps urc3605 codes are close enough?

unfortunately not. I had the same problem, in the end i had to go and but a universal remote (which are very cheap, depending on where you look!). After you have your remote, the code you need to sync. the remote to the TV is 210

try 032 or 132 or 11034 or 694.
These have all worked on various remotes including Dish Network remotes for the Durabrand DWT 1304 color 13" TV. Look at the Funai Corp codes and the Orion codes. Sometimes they work, Funai Corp makes Durabrand.

Timrodlady

try www.xdiv.com/remotes

Durabrand codes are very difficult to find, only few codes are public, as this manufacturer is not listed on universal remotes user manuals.
You can find few codes on discussion groups, often they do not work. The requests usually stay unanswered:

RC Forums: Durabrand codes one for all (Page 1 of 2)



Star Choice IRC442 Remote Code for Durabrand dbtv1020


Durabrand Remote Code? - TiVo Community


Durabrand Remote Codes??

The best thing to do is purchasing a replacement remote.

You can purchase the remote opening the link below, chose your model or contact the seller to purchase the remote:

Replacement Durabrand tv remote controls .


Or:

Used Original Durabrand TV-5620-16 Remote Control

DURABRAND remote control, UK

Contact the seller to ensure you are purchasing the right remote for your model.

Thanks.

When trying to program a universal remote for the BH2004D, try the codes that came with the universal remote for HAIER.

I seem to be the only person on the net with the 3 digit Durabrand universal remote code which works for 13' and up Durabrand TV's and TV/DVD TV/VCR combos. The culprit is 3 digit code 189 for a Funai and Emerson. I only know this because I have like 4 of these TV's haha.

Ron
[email protected]

I am not sure about Direct TV but dish network does not allow the hookup to go through their box...it must go through the TV only. Speaking with Duraband at 1-800-256-2487 confirms you have to have a Duraband remote and universals won't program to it. Ask for parts dept. and order a new remote. Sorry - not good news for me either!!!