To re-program the Si-tex CSV-106 depth sounder to feet/meters/fathoms: Push and hold down the MENU key while turning the unit on (POWER key) to enter a special menu. Release both keys after you hear two beeps, almost immediately. Use the LOWER ALARM key to select the desired unit for depth, then turn off the depth sounder. That's it, just turn on again to see the change.
There is also another menu (for testing sounder) available by pressing the MODE and turning on as above.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi! If your unit's serial number tag (on the bottom) has an 'X' after the model number.....Pmax 210X then you can change it to meters. The 'X' means international. If it is a US domestic model you are stuck with feet. Here's the manual for the sounder in case you need it: Pmax 210 Best of luck! Mike
Hello, is the symbol the one pictured below? If so this means the 'broadcast message' service is active. This can be switched off in Messages>MMS>broadcast messages.
If it is not this symbol, then you can download the full manual here:
Any other questions just give me a shout :) Si