How to change the ink cartridge in a hp deskjet F2280

SOURCE: Carriage error Hp F2280

Same thing happened to me and I took it back to the store, where I bought it from. They replaced it with a new one and told me that it didn't have any software installed, like if you have a motherboard without bios ..

SOURCE: hp 21 black cartridge dead

Purchase a replacement ink cartridge.

SOURCE: HP deskjet f2280 won't scan

you can try clicking MY COMPUTER then C: then PROGRAM FILES then Hp then Destination folder then bin then find the hpscnapp with a printer icon.Scan will work.Hp 2280 frequently encounters error especially if you're using VISTA. Hope i helped! Good day!

Clive

• 4362 Answers
• Posted on May 01, 2010

SOURCE: lost cd to re instal HP Deskjet F2280

Hello
HP Deskjet F380 All In One
You not have to have a disk, but you have to have a driver for it to work.
I have put the software driver for you on my website you can download it from there all you go to do is click on the link I put for you, it may take time to download for you depending on the speed of your internet all the best.
http://www.4all2sell.com/driver/HP-Deskjet-F380_all-in-one-enu.exe
After download just click on the icon and follow the instructions, please let me know if this works the scanner as well so I can gave this to some one ell’s on here that is also after the same software
All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time.

SOURCE: my HP deskjet F2280 is blinking and not print.i

Hi

Please try to reset the printer.

Please try this solution.
Remove the USB cable into the printer and leave the printer on.
Remove all the cartridges.
Close the cartridge door and wait for the INSERT INK MESSAGE to appear.
Disconnect the power cable and from the power source supply.
Move the carriage using your hand from the original position to the other side of the printer and then move it back to original position. Wait for couple of minutes
Reconnect power cord and turn on the printer.
Return all the ink cartridges and close the door. Wait for the calibration process.
Print the test page to check if it working.
Reconnect the USB cable and try to print again.
Please rate and make a comment if you find this solution very helpful and might help others as well. Post more comments if you need more help.

Regards and thank you for using Fixya !