My remote is about 15 years old and I lost the manual I need to be able set the clock, what code opens and plays the cassette player part of it.

not sure about a users manual or other parts unit is belt driven
you can by the stylus

turntableneedles com
http://www.turntableneedles.com/THOMAS-PACCONI_c_50123.html

some thing easy diy if no sound while playing a cassette
try cleaning the head (silvery bit )
of the cassette player with cotton bud and metho

Hi
To set the clock:
Manual Clock Setting
1Press the VCR button, then press the MENU button.

2 Press the PLAY [UP]or STOP [DOWN] button to select INITIAL
SET UP, then press the FF /OK button.

3Press the PLAY [UP] or STOP [DOWN] button to select CLOCK,
then press the FF /OK button

4Press the PLAY [UP] or STOP {DOWN] button repeatedly to set

the TIME. Every time you press the PLAY [UP] or STOP [DOWN] button,

the time changes in one-minute increments. If you press and hold

the PLAY {UP] or STOP [DOWN]9 button, the time changes in 30-minute
increments

5Press the PLAY [UP] or STOP [DOWN] button repeatedly to set

the DATE (month and day). Every time you press the PLAY

[UP] or STOP [DOWN] button, the day changes in one-day increments. If

you press and hold the PLAY [UP] or STOP [DOWN] button, the day

changes in 15-day increments.

When the month and day are correct, press the FF /OK
button

6Press the PLAY [UP] or STOP [DOWN] button repeatedly to set

the YEAR. When the year is correct, press the FF /OK
button. The day of the week will appear automatically

7Press the FF /OK button once again to skip "AUTO

CLOCK" and go to "D.S.T." (Daylight Savings Time).

Press the PLAY [UP] or STOP [DOWN] button to set D.S.T. to ON

or OFF. If AUTO CLOCK is OFF, you may set D.S.T. to ON or
OFF only
8Press the EXIT/STATUS button

Hey!

Hopefully this website will help you out:
http://www.thompsontv.com/rcarc.html

I see Emerson listed as one of the TV's, so hopefully it works!
If it does, please feel free to rate me :)

Enjoy Idol :)

Cheers

To set the clock please click on the link below then go to page 15.

http://a248.e.akamai.net/pix.crutchfield.com/Manuals/257/257KSFX490.PDF

Good Luck

yorx model 5285 clock radio cassette player , the clock keept blinking and cannot set it.

Try the following:

1. Open tray and remove any disks in tray.
2. Close tray.
3. Switch Off Player and Unplug from mains wait 30 seconds (this clears RAM)
4. Reconnect to mains
5. Turn on player with remote.
6. Press ENTER on remote.
7. Press 8, 4, 2, 6, 9. Using keys on remote. If your player is already set to region 2
8. Press ENTER on remote. (The tray will open and player will power off and close tray.)
9. Switch on power from remote.


Player is now Region Free.

go to this site, find your remote and read the instructions:
http://www.xdiv.com/remotes/

I purchased this same DVD player (DRC282) and none of my universal remotes worked for it. Since I was lucky enough to buy one without a remote, I ended up purchasing an RCA universal remote (RCR3273). Once again, none of the codes worked so I had to unplug the unit for 5 minutes, then plug it back in and hold the Standby button for 15 seconds to return it to it's factory settings. I manually searched through 71 codes before I found a match but the play, pause, rewind and many other functions failed. I tried again skipping over 71 and found the right code at 115 tries. That one had all the functionality I needed. You should try the same strategy with your Comcast universal remote. Skip the first match and keep going until you hit the second manual match.