I need to change the date on my watch and don't have the instruction manual. Thanks!

To change the date and time on your Steve Madden LED touchscreen watch, you will need to follow the instructions in the user manual that came with the watch. If you do not have the user manual, you may be able to find information on how to set the time and date online or by contacting Steve Madden customer support.
To set the time and date on most LED touchscreen watches, you will need to press and hold a button on the side of the watch for a few seconds until the time and date display appears. You can then use the buttons on the side of the watch to set the time and date. The specific buttons you will need to use and the sequence for setting the time and date may vary depending on the make and model of your watch.
As for the timer, you will also need to refer to the user manual for instructions on how to use it. The timer function may be accessed through the watch's main menu or by pressing a dedicated button on the side of the watch. Again, the specific steps for using the timer will depend on the make and model of your watch.
If you are unable to find the user manual or are unable to set the time and date or use the timer function, it is recommended to contact Steve Madden customer support for assistance. They will be able to provide you with specific instructions for your watch.

Hi,

Please call the manufacturer directly and ask them to send you the proper instructions for your watch. Their phone number is 1 (800) 840-2933. They should be able to email the instructions to you. Thank you.

i don't know about on line instruction.
but i could help you ....
there is two position for crown 1 and 2.
bring crown on position 2 and turn crown clockwise to change TIME, DAY & DATE.

bring crown position 1, and turn crown counterclockwise to change DATE.

your watch has Chronograph / Stop watch.
use that please press right TOP button chronograph will START, press again Chronograph will STOP.

Press bottom button to RESET Chronograph.

hope it will help

Return for warranty repair. They have a 5 year warranty. Your instruction book has details and address to send it in. Send a copy of your receipt also.

Hi ccj19cjj,

If you don't have the manual, this is the direct link to all Timex watch instructions/manual:
http://www.timex.com/info/Product_Instruction_Guides_Downloads

Hope it helps.

Thank you for using FixYa.

Hello Joanne,

You can find Armitron Manuals and Instructions at the Armitron website. I've included a link below for your convenience.

http://www.armitron.com/watch_instructions.asp

Please let me know if I can be of further assistance to you.

--Sandy

Please be sure to Rate this message! Thanks!

mcdevito75 here, That sounds about right, each watch is slightly different, some watches, have the date change at 10:30 PM and some at 11:00 PM, and if your Tag also has the month or day to change along with the date, this could account for the date changeing kind of late. I don"t think it"s anything to worry about.

to set the time: switch to timedisplay and hold the "S" key for three seconds, then adjust with the arrow key´s
to set the date: same prcedure as time but first switch to the date display

You can download the Perpetual Calendar instructions from Timex's website here.
If you don't like clicking on a link, here's the URL:
http://assets.timex.com/instructions/perpetualCal.pdf

Hope this helps. If this solution has been what you needed, please take a moment to rate it a fixya, and thanks for asking here!

mcdevito75 here, The manufacturer recommends you don"t try to change the date between certain hours as this could hurt the date changeing mechanism inside the watch, I don"t think you did any harm (LUCKY) and the date changeing 45 minutes before mid nite is just about right. BUT! if the date change was aliitle closer to mid nite at 1 time you can try to reset the date, here"s how, your stem should have 2 positions to change the date without haveing to cycle the watch the 24 hours 60 times. Slip a finger nail just under the crown and gently, gently lift the crown to it:s first position, it may take a little practise but you"ll get it, once you do, trun the crown and you should see the DATE change, if so set the DATE to 1 DATE before the DATE you want, now pull the stem out and set the correct gate and time of day. Your watch is now reset and date will change on time, around nid nite.