Getting memory card error when I install an 8GB Sandisk card

1 Insert your SanDisk 8GB memory card into a card reader connected to your computer.

2 Double-click "Macintosh HD" on your desktop.

3 Click on the "Applications" folder, then the "Utilities" folder.
4 Double-click "Disk Utility". Look on the left side to locate the drive that says "SanDisk.
5 Select the capacity of the drive on the left side of the window. The capacity will state "8GB" or "8,388,608 kilobytes." Click on the "Erase" tab to format the memory card. When you see "SanDisk" listed as the device's name, the capacity will be located above. You need to select the capacity and not the device.
6 Select the appropriate "Volume Format." Under the "Volume Format" button, select the format you wish to use. Select "Mac OS Extended" if the SanDisk 8GB will only be used on Macs, or "MS-DOS (FAT)" if you will share the card between a Mac and PC. Select "Erase" to complete the format of your SanDisk 8GB memory card.

... and the text of that error message is __________________________________________

> new

Take it back, and get a replacement, under WARRANTY.

You can add up to 8GB of SD memory. Your best approach is to add an 8GB SDHC Sandisk (always use Sandisk) Flash Memory card. You can find these cards with TOPO maps installed at the http://www.jungleghost.com website. You can also find the latest instruction manual that describes how to install the card.

try
SanDisk 8GB microSDHC Memory Card with a card reader and check whether there is problems, and also try the card with other mobiles and find whether there are problems, if there is a problem we can understand that the card is destroyed , you can replace the card with other one now.

insert the card to a card reader then format it in the following way:-
right click my computer then menage then click disk menagement then right click on your card then click format. good luck.

install the usb drivers 3.0 it wi;l solve u r problem...........

Hi,
I'm sorry to tell that PowerShot SD 630 does not support SDHC cards over 2 gig.
If you want the camera to take a card over 2 gig then you are stuck standard SD cards.
The other camera does support the card because it's a higher model.


Regards.

is the lock switch fliped wrong

Have you done a format on your computer? If you have, format the disc on the Canon especially if you got the disc from the internet ie abroad.

A lot of phones can only "see" a certain amount of memory