The base fits into the two adapters on the chassis, then once fitted you can chage seat position by pushing down the two buttons on either side of the seat unit you can move the seat up and down as you want. Also to unfold you simply push the button in the middle of the handlebar (the same button you use to adjust the height of the handlebar) you hold this button in and sort of give it a little shake and the chassis should unfold pretty much by itself and sort of 'pops up.'
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
We do not advise doing so. The Quinny Buzz seat unit should only be used with a Quinny Buzz chassis and likewise the Maxi Cosi Foray seat unit should only be used with a Maxi Cosi Foray chassis. A combination of the two has not been tested or approved for safety standards and we cannot guarantee the safety of using such a combination.
Please find attached Handy Hint guide for removal of Quinny Buzz seat fabric. We advise handwash only maximum 30 degrees. Allow to dry naturally - do not tumble dry. Exposure to direct sunlight may cause fading.
The Quinny Buzz can only be folded/unfolded with the seat in the most upright position facing forward. If this is the case and it won't unfold, remove the seat first by pushing down the two grey release buttons either side of the frame. It may be the case that the gas strut (automatic close/opening mechanism) is seized and will need replacing. This can only be done by Dorel UK 01842 763 281 as it is a pressurised unit. Hope this helps
Hi to unfold undo the clip if there is 1, some don't have them. lift the handle slightly then it should unfold it self.
To fold you need to apply the brake, stand in frnt then the 2 large grey buttons either side of seat, 1 pushes in 1 comes forward, do this & pull down towards your feet this will fold it up. Don't mistake the small grey buttons on side of seat they are to lay seat back/forwrsd etc; the large buttons are on the frame.
Sometimes the stroller does not automatically unfold easily if the seat is attached. If the seat is not attached, and the stroller is still not automatically unfolding properly, there is probably something wrong with the internal spring. have you had the stroller long? Quinny says that the spring will last "virtually forever", but we all know that there are always lemons. If you have not had the stroller for a very long time, contact quinny and ask for a replacement. They have been pretty good about getting them out to clients.
If you have any further questions, feel free to contact me anytime: [email protected]