Logitech mouse is'nt working

http://www.gamecheatslive.com/
Here is a full list of wireless wii keyboards that we know are compatible with the Wii.
Wii Logitech Cordless Keyboard
Microsoft Wireless Laser Keyboard 6000 v2.0
Microsoft Wireless Optical Desktop 1000
Microsoft Wireless Optical Desktop 3000
Gyration GP9110
INNOVERA Wireless Keyboard and Mouse
Logitech EX110
Logitech LX300
Logitech LX700
Logitech MX3200
Logitech Cordless Desktop S510
AGK 100-50
PC Line PCL-K350

Did you spill something on it or is food lodged in unit if so take apart clean.
Fresh batteries would be good start.

i have the same problem

just try wih installing new battery in mouse and keyboard then press the connect button to sync with the reciver.

whenever you chage the battery you have to syncnonize your keyboard and mouse to sensor of the reciver. you can see on the back side of the keyboard there is connect button just press it and on the recevre side also press the connect buton same setting do with mouse also.

If this is a cordless Optical mouse it uses a red optical beam to sense the surface below it. This is how it moves the pointer. If this is the same mouse/keyboard combo I have it does not have any other lights on the mouse itself.

It is quite annoying when its dark in the room since the bottom is somewhat transparent.

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

If the MOUSE isn’t working, push the small RESET/CONNECT button on the back of the mouse to connect to the receiver. Then they should work okay.
Hope this helps. Bud

Send it back if you havent already.

You probably already done this but try pressing the receiver button and while it is flashing turn the board over and press the small reset/connect button on the bottom of the board and also the reset/connect button on the bottom of the mouse. It should work okay after that. here is hoping that helps. Bud