Dacor ECS127 Epicure Electric Single Oven Logo

Related Topics:

Question about Dacor ECS127 Epicure Electric Single Oven

2 Answers

Dacor error codes

My Dacor single wall oven won't stop beeping... error codes F1 and F5 keepflashing.

Posted by ooshki on

Ad

2 Answers

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,784 Answers

HI. the F-1 code is a System Watchdog Circuit failure code.

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).

Concerning the F-5 code. This is an oven temp sensor failure code. have it replaced asap. ((Check the wiring leading to and from the control and sensor for cracks and fouled structure. if the wiring is bad, replace the harness as well)),

Posted on Aug 01, 2009

  • Anonymous Nov 22, 2011

    My built in oven is continuosly beeping with an F3 showing. Does anyone know where to get the sensor part?

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had the error code F 0.
I unplugged it and plugged it back in.
This fixed my problem.
Here is a link to Dacor's error codes.
http://www.repairclinic.com/0078.asp#Dacor

Posted on Mar 12, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Dacor model ersd30 how do i fix an F0 error code that also blinks F1 and beeps

Hi dan8260,

If you're encountering F0 error code, it is due to a stuck function key. You need to replace the touch pad to fix this error. If the touch pad is part of the clock, you need to replace the clock or ERC.

Hope it helps.

Thank you for using FixYa.
1helpful
1answer

What does the F1 mean

Hi, the F1 error code means a problem with the System Watchdog Circuit..

Press "Cancel", if beeping continues after 30 seconds, replace the main control board (also called clock or ERC).
4helpful
1answer

Dacor oven beeps and shows F1 code

-F1- Alarm “System Watchdog Circuit”
The system will detect a failure in the internal watchdog element relay circuits and will activate a
cancel feature. F1 will be displayed in the time digits and will beep until the cancel button or another
function is selected. An F1 failure could be detected in cook or time of day mode. With an F1 failure
the ERC is picking up a command to supply heat without receiving an input from the membrane. The
watch dog circuit is designed to prevent this.
If the beep continues after pressing cancel check the main control (ERC)
Dacor


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

4helpful
1answer

Dacor single oven flashes an F2 error code and won't stop beeping!!!

This is from manufacture service manual:

-F2- Alarm Heating Mode High Temperature
Is activated when the ERC senses a runaway heat condition or when the temperature exceeds
“runaway limits”. The ERC will beep until the cancel or another function is selected. If the alarm
repeats the F2 alarm check the oven sensor and wiring after fi rst checking for a stuck relay. If alarm
goes away verify the oven will complete a clean cycle without any type of failure.
Another words the problem with oven sensor or relay board.

I’m happy to help further over the phone at https://www.6ya.com/expert/vitaliy_f406165329c75ede

0helpful
1answer

PCS 130 Keypad

Dacor probably won't cover anything. F1 is either the touch pad or ERC (clock). If it stops beeping when the touch pad is uplugged from the ERC then the touch pad is the problem if not it is the ERC. Call Dacor Customer service to get a price on the parts and to voice your displeasure.
1helpful
1answer

Dacor oven beeping

Keeps flashing F1 and beeping help! how do I make it stop?
Apr 25, 2008 • Ovens
12helpful
1answer

Dacor cps130 wall oven f1 error

According to the manual, this is an element relay circuit failure. Call the tech.
Dec 04, 2007 • Ovens
1helpful
1answer

Dacor Oven Won;t Heat

power surges can short out the electonics in appliances. If you can locate where the tech sheet is and I would say its behind the control panel on top, look at the wiring diagram and see if there are any replaceable fuse's. Or a resetable fuse for the heating element. If not check to see if power is getting to the main control bord. If there is power there you may need to replace the control.
Not finding what you are looking for?

3,304 views

Ask a Question

Usually answered in minutes!

Top Dacor Ovens Experts

Paul Bade

Level 3 Expert

1717 Answers

Ngoro

Level 3 Expert

3493 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you a Dacor Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...