I got this message all the time I use the camera, "Please turn camera off and then on again" after a couple of seconds. Do you know how to fix this problem or what is causing the problem?
I have the same problem and i dunno the solution. I think this the worst camera i have ever had. Never buy Lumix-DMC-TZ1, its horrible.
Panasonic Lumix TZ3 began Plese shut down turn the camera off and back on again" after every picture of after being on for around 20 to thirty seconds. If I was able to take a picture, it would be displayed up-side-down.. The jpg was correct when downloaded. This happened 16 days after I purchased the camera. (2 days after the return period). I was able to exchange the camera for another, and everything seemed to work, then I began to get up-side-down images again. The only items were the old battery, (freshly charged) and the old memory stick. I was unable to locate a Service Center contact for Panasonic that was of any help. Any suggestions? The camera worked great for the first two weeks I had it, but the same problems with a new camera has me stumped.
Hello friends,
My Panasonic Lumix dig. camera Screen is showing the message that pl. switch off the cametra and on again. when i did the same again I face the same problem. Pl. help me to solve the problem
I'm sorry that the Camera
is displaying the error message. "TURN THE POWER OFF AND ON AGAIN"
displays on the LCD screen when the Lens Mechanism is stuck or when affected by
any malfunction. If turning the power on and off again does not resolve the
error message, try doing a power reset. Please follow the below steps to
perform a power reset.
·
Turn off the camera.
·
Remove the battery pack.
·
Press and hold the power button for 30 seconds.
·
Allow the camera to remain without power for 60 seconds.
·
Reinsert the battery pack.
·
Turn on the camera.
Also tryinitializing the Cameraif
you're able to access the Menu items on the Camera. The Initialize option will
be available under Setup or Main settingsSub
Menus.
If the issue persists again, service is required.
Please click hear to locate
the service center near your area.
Thanks for understanding. Please let me know if
your require any clarifications.
883 views
Usually answered in minutes!
Yes, I too face the same problem with my camera
"please turn camera off and than on again."please help me!! and email me.
Just happened today for the first time. What is the solution
All of a sudden, I get the messae please turn camera off and then on again. Help!!!!
I can playback with no problem.
My daughter dropped her Lumix and this problem then occurred, I researched it on the Internet, and found various suggestions. e.g. apply slight pressure to the lens when the camera starts, wipe outside of lens, remove batteries etc. etc. etc. etc..
I tried everything - every time the camera was turned on the message appeared.
So I took out the batteries and sd card and stuck the camera in a drawer and bought a new camera.
Now the interesting bit - one month later, out of interest, I got out the camera, stuck in the battery and an old SD card (I used the Lumix card in my new camera) - AND it started up with no problems!! The problem had gone away - why - different SD card? Some internal memory finally "forgot" it had a problem?, perhaps it just had a long rest? - no idea.
Anyway its OK now, and I now have 2 cameras.
Weird - thank goodness I did not bin it!
So don't dispare - try it - it may work for you.
ps. With the original sd card in, it still works ok.
please turn camera off and then on again..... switch on - off nothing happens... take out battery & memory for all night and try.... nothing happens...what i should do?
×