Hi its violy here, i have a problem with my gps NAV-350000388/gps/navigator how can i get a new software to update my gps am in the philippines.thanks

Error message "PND needs to be updated" means the software version of your GPS is lower than 4.93. To update the maps of your GPS, please update the software first by visiting the link below:

http://support.magellangps.com/support/index.php?_m=downloads&_a=viewdownload&downloaditemid=357&nav=0,16,19,372

*Note: PND means Personal Navigation Device.

I got helpful assistance from Magellan Support by email: [email protected]

The tech support phone is 800-707-9971 during business hours

which device ?

Cobra NavOne 3000

Go to the Cobra website (see Resources) and click on "FAQ" at the top of the page.

Use the drop-down menus to select "Nav One 2750-2950-3000-3080" and "Software Updates." Click "Submit."

http://reviews.cnet.com/car-gps-navigation/cobra-navone-3000/1707-3430_7-31138256.html

Click "How do I get and load software updates?" Click the bold "HERE" link.

Scroll down and click "Nav One 3000/3080."

Click on the latest update link to download the update to the computer.

Connect the NavOne's power but do not turn it on. Connect a USB cable to the computer, and connect the other end to the GPS.

The GPS device's LEDs light up, indicating a connection.

Double-click on the update file you have downloaded.

Click "Next" until the update begins.

When you are notified of completion, close the update

hope this helps

how i canfix my gps evesham nav-cam 2007 is not working just show me navigator loanding

switches on but no navigation. Press navigation and it bleeps only but will not change mode for search

1. Download the SONYNAVU_U73T_3.2.CN.BIN file to a temporary or download directory.
2. Connect your nav-u personal navigation device to the computer using the supplied USB cable.
3. Power on your nav-u personal navigation device and wait until the "Connect to PC" message is displayed on the nav-u screen.
4. Start the nav-u Tool software on the computer.
5. At the "nav-u tool" window, click "Upgrade System".
6. On the right side of the Upgrade Screen, verify that the target version is 3.00.
7. On the left side of the Upgrade Screen, click the "Browse" button, and go to the directory where the SONYNAVU_U73T_3.2.CN.BIN file was downloaded and then click "OK".
8. In the "Name" box, click to select "3.02 cn NV-U73T" update, and then click the button.
9. After the update file is transferred to the nav-u device a "Transferring Upgrade file completed." message is displayed on the computer.
10. After the system software update is complete, the nav-u device will automatically shut down and restart.

hi is there anyone out there can tell me how to reformat my memory card for my RAC sat nav 200 gps. Only tried to run the software that comes with it ,but cant seem to see anywhere to download new and update the card. Thanks from neil. [email protected]

Hi i had same problem. When you switch on Nav Cam, go to System - System Info - Factory Reset - Yes. Nav Cam will then restart& should be ok.

You will not lose your personal info ie: postcodes etc.

Make sure memory card is installed properly.

All we need now is updates if anyone know where to get them.

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=150362945965&ssPageName=STRK:MESELX:IT

I found mine on ebay, search evesham n30 apparently has it for the nav-cam 7000 as well, i have a nav-cam 2007

I lost my SD/MMC Card for my Navigator Evesham Nav-Cam 7000 GPS Receiver I vant to get a nother one or dowload Nav-Cam 7000
[email protected]