I534 memory full, won't clear

I'm having the same problem. It will still allow me to take video though. I don't know what's going on. I've cleared out my memory, and checked it under settings. Almost all of my memory is clear. I don't know why it's doing that. :(

No, when you format they are lost forever.

Make sure your batteries are fresh or fully charged. Your memory card should be a class 4 or better for high speed writing. Don't let it get too full before downloading. After downloading, format the card in the camera to erase and initialize it.

Consider NOT using a driver.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program.

Hi Mr Varshap4

# Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com
# 2 Open up 'My Computer'. You should see it under the list of available drives.
# 3 Check its contents first to make sure that you have the right drive.
# 4 In 'My Computer', right-click on the drive and choose 'Format'.
# 5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.
# 6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

try to add some download applications that would some let you directly send pics and video messages.

You need to format the SD card before it will be used by the camera. Formatting instructions are in the manual.

Copy the existing photos on to your PC, switch off the camera. Remove the SD card and format the SD-card using a SD-card reader, this will clear all the card contents. Now try using it in your Camera again. Ideally, you should be able to save photos on this SD card. Other way would be to insert another SD card into your camera and click photos and check whether those photos are being saved into the SD card(this can be done using display option in your digicam.)

Ok i had the same problem. But what i did is,i removed the memory card used my memory card reader and format the memory card. The i turned the camera on and used the internal memory to take a photo.The i opened the memory slot and reinsert the the memory card and walla the memory full error was gone.

The code means that the memory is full. Clear your memory, reset your camera and try again. You can download a manual at www.moultriefeeders.com that will help you.