Adding machine problems

Is this what you are looking for? Amazon com SHARP EL 1801V Ink Rollers 3 Pack Black Red Compatible Office...

You may download the manual here.

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay bcsxtr

just hold down the stop reset button for 10 seconds it will bypass the ink counter

yes you can refill the #40 cartridge mfor the JX300 - but when you put it in you will get a message saying 'ink volume unknown' and it won't do anything and the yellow light on the machine will be blinking. - to solve this problem hold the stop button down till the count of ten and the machine will work normally except you will get no low ink warning
Tony Rae
Inkspot
London, Ontario Canada

Block yBob - did you ever get an answer to your problem. I'm getting ready to install an ink cartridge into the same machine.

Hi there

Ok I have put a MP-Tools in my website for you to try out this tools are for reseting your inks plus it can do much more.

Click on the link to download it.

Click Link = http://www.4all2sell.com/reset-tools/MPTool.exe

All I ask is please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

All files on my website are only there for a limited time

The ink cartridge holder was kind of wiggly, so I put a wedge in the side to push the contacts together more. It worked.

Ok i know this is kinda old, but i found a solution.

First to those people to state I found a solution from hp, cannon etc etc and not give out the direct link, or instructions, then whats the point fing posting????

This error happens when you install an oem cartridge onto your system. Or havent used it in a while, so the machine is somehow misfigured.

This solution is for canon mp800, simply switch off printer. HOLD stop/reset and press and HOLD on/off button. release stop/reset. Now press stop.reset twice. then release on/off button, press stop/reset 4 times, wait 20 seconds, press on/off button twice.

switch machine back on and the printer should find the cartridges.

This method maybe the same for your mp*** if not google RESET CANON PRINTER MP*** and you'll find the correct buttons to press.

here's a printer on reseting a bunch of canon printers http://tricks-collections.com/reset-printer-canon-mp140-mp160-mp180-mp210-mp220-mp460-mp470-mp500-mp510-mp530-mp600-mp610-mp800-mp820-mp810-mp830-mp960-mp970/

good luck.. and FU canon for adding you scamming chips into cartridges.

i need driver canon