- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
While at this message remove any USB storage devices plugged into the computer (Cell phones, USB thumb drives, external hard drives) also eject any CDs and Floppies. Turn the computer off and back on. If the issue persists then it is possible that the power failure damaged a physical component of the computer.
I don't know if you have reset the computer but if not take one battery terminal off for about 5 minutes and that will reset your computer. If you don't have anymore problems it should not come back on.
sounds like the light board in your on board computer went out.this can be replaced separate.the radio needs to be removed then reach inside the whole that the radio came out of and on the side of the on board computer you will feel a lever,pull that and the obc will pop out.the light board is in the back and push's in from the side.
Impossible to diagnose remotely. You need to try things like switching the computer off at the mains for a few minutes. If I had the computer I would try a different PSU.
A lot of these phones get stuck. Reset by using the home and on off buttons. Hold home and on off for 30 seconds then let go of home while connected to computer. Leave connected to computer and restart computer. Leave connected to computer for awhile. Mine came back after about six hours. I think it has something with the RAM and the motherboard powering down. If that doesn't work try putting phone in restore mode and restore.
First thing to do here is to unplug the printer from the computer and restart the computer , then once the computer is already back that's the time you connect the printer back and lets see if the printer will be detected by the computer, if still not and printer is still showing offline, better go to control panel and gp to printers and faxes and click on add and follow the wizard to install a ewn printer that should correct the problem.....
I have had similiar issues in the past. Try powering it down by un-plugging it from the back of the pc, wait at least 2 minutes before plugging it back in. After 2 minutes, plug it back in and power on the pc. Sometimes this helps.
1. power-off your computer. unplug video and power cables. remove your video card hardware from its slot and plug it back in. put the video and power cables back. power on your computer. try this up to 3 times until your system is back to normal. it will be best if it works your first try. if it doesn't consider changing you video card.
×