Visioneer OneTouch 5300 Flatbed Scanner

Hello.

I am a Support Engineer with Visioneer.

The Visioneer OneTouch 5300 Driver is supported for Windows 2000 / Me / 98.

We also have an extensive support site and knowledgebase at http://support.visioneer.com

Regards,

Visioneer Support

http://support.visioneer.com/products/5300/downloads.asp
download at link above

try this link -- i assume you need drivers ,, if its applications s/w you need and youc ant find it , let me know

http://support.visioneer.com/products/5800/downloads.asp

For the Visioneer OneTouch 5600 Flatbed Scanner in windows 7 go to the visioneer web site at http://support.visioneer.com/products/5600/downloads.asp and download the file 5600.303110.EN.exe. Then right click on the file name and select Trouble shoot compatibility. Do not connect the scanner until told to. Run the program using the recommend settings. That installs the drivers. It does not install the paperport support software but does install the monitor in the task bar. That is enough to use the scanner and save or print the scans.

Go to the scanners website and look for a download for the software

http://orders.visioneer.com/category.jsp?category=PAPERPORT

This is the best one. It works on all scanners.

Download the software and driver, unless you have the correct disk for your version of the operating system.  Install all of the software/driver. phisically hook up the machine to the computer and turn it  on. 

http://support.visioneer.com/

I have a GOOD, WORKING driver for the Visioneer 5300 USB scanner, for Windows XP and Vista.
I include very detailed install instructions that I have personally wrote and tested. Send me an e-mail to [email protected]. Subject Line - 5300 USB driver

You can go to Visioneer.com and order the disk. It is free but the shipping is $9.99.

You need THOSE driver

Download

Rate me as FIXYA please