Hi,
I am having a hard time putting the back on after I replaced the battery. I've always changed my own batteries on watches and never had a problem getting the backs on or off, but this one is really hard. Help!
First, find the arrow on the back and use a small screwdriver or knife to pry open the back at that point. Replace battery and then replace back wiht the arrow pointing to the middle of the band as orginially found. Third, press the back on the left side and then use a rubber mallet to strike the "raised" side down and it'll snap in place. Alternative method -- use a cushioned screw clamp to compress the back.
1,569 views
Usually answered in minutes!
I have the same problem...Actually, the clerks in two stores have also tried to reattach the back and have been unable to do so. My wife and I have tried all possible positions and cannot get the back to latch back on.
Any suggestions will be appreciated.....Ken
Winding stem fell out. Need replacement
×