Digital blue movie creater 2.0 with windows 7 -after installing software and connecting camera via usb a message keeps popping up saying: "Your camera is not plugged in. Please connect you camera (38) ". We have tried different usb ports, is this compatible with windows7? any suggestions please?

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the web site:
http://www.opendrivers.com/driver/226086/medion-disney-pix-digital-camera-driver-1.0-windows-xp-free-download.html
select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"), will probably have the yellow exclamation mark on it saying that it is not working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" has not passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

After doing this I am able to download the pictures and everything works great. I hope this helps.

if the drivers fail to install on win7( no longer supported by Microsoft) try going to the publisher web page and downloading the drivers direct from there for win 7
if there is no microphone connection shown by the product before installation, might I suggest a program that has that connection listed or find out if a mic driver for the michrophone would solve the problem

try re installing the software again, or maybe its not compatible. try and update via internet

Hi Odalys,
Try this solution that was previously posted on FixYa:
______________________________________________________
My daughter just received one of these camera's for her 6th birthday and is extremely excited. I am running Windows XPand was getting the "No pictures on camera" error. I tried downloadingthe drivers for this but that did not work. Here is what I did to getthe camera working:

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"),will probably have the yellow exclamation mark on it saying that it isnot working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" hasnot passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

After doing this I am able to download the pictures and everything works great.
_______________________________________________________
I hope this helps.

Chris (ziraffa)

this was found on another solution from ncmerc on Fixya
1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"),will probably have the yellow exclamation mark on it saying that it isnot working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" hasnot passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

After doing this I am able to download the pictures and everything works great. I hope this helps.

my YP-U3 player will not connect via my USB port. When plugged in to a port that connects my digital camera normally it first says on screen "USB Connecting" then changes after 2 to 3 seconds to "disconnected - Charging". it has fully charged and no change. I have checked the hold switch is disengaged. the media studio software is installed ok and the portable devices functions are greyed out. I cannot find the device on my pc. I am running Windows XP SP2. I will be returning it to the store where it was purchased very soon if i cannot find a solution. I notice there are a lot of people who have posted similar problems that have not recieved solutions.ya i have th same problem im using window xp 2

If you have done what mugman asks, try this fix:

My daughter just received one of these camera's for her 6th birthday and is extremely excited. I am running Windows XP and was getting the "No pictures on camera" error. I tried downloading the drivers for this but that did not work. Here is what I did to get the camera working:

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"), will probably have the yellow exclamation mark on it saying that it is not working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" has not passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

if you have a nv-gs35 i am pretty sure that ths camera can not do video transfer via usb, the port is not usb2. it can transfer video via the dv port only. please check the operating instructions.

My daughter just received one of these camera's for her 6th birthday and is extremely excited. I am running Windows XP and was getting the "No pictures on camera" error. I tried downloading the drivers for this but that did not work. Here is what I did to get the camera working:

1) Connect the camera with the provided USB cable.
2) Download the latest driver from the Digital Blue web site: http://digiblue.com/customer-service/downloads/index.html, select the "The Disney Pix Micro Drivers for WIN ME, 2000, XP"
3) Install this driver, this will not enable the camera to work yet.
4) After this driver has installed, go to Control Panel
5) Select System
6) Select the Hardware tab
7) Select Device Manager
8) Find the device in the list (mine said "USB Digital Still Camera"), will probably have the yellow exclamation mark on it saying that it is not working.
9) Double click the device
10) Select "Reinstall Driver" from the General tab
11) When asked if Windows can connect to Windows Update to search for software, select "Yes, this time only" and click Next.
12) Choose "Install the software automatically" and click Next.
13) You should get a message saying the driver for the "DB CIF Cam" has not passed the Windows Logo testing, select "Continue Anyway".
14) Click Finish.
15) The first time I did this, I needed to take a picture while the camera was connected to the PC.

After doing this I am able to download the pictures and everything works great. I hope this helps.

i lost the usb wire can you help me