Question about Fossil JR9455 Watch

1 Answer

How do you set this watch....4 buttons

Set 4 button digital watch

Posted by walsha590 on

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

SETTING THE TIME AND DATE ON AN OLD 4 BUTTON DIGITAL WATCH



[L1] [R1]



[L2] [R2]



SETTING THE TIME.


Press [L2] to move through the modes. When the time display flashes, you are in the correct mode to set the time. The hours first, then the minutes and seconds.


Press [R1] to advance the numbers, [R2] to go to the next.

Press [L2] to save your settings. [L1] is not used; it's the light.


SETTING THE DATE AND DAY. After setting the time (seconds flashing) push [R2] to move though time, backwards, to date, [R1] to set day, [R2] to move to month [R1] to set the month. Push [R2] to get to the day of the week, then [R1] to change. [L2] to end.

Posted on Jan 15, 2011

  • Ashish Gupta
    Ashish Gupta Mar 18, 2017

    Too much helpful!! !

×

Ad

5 Related Answers

saturnd00d

  • 5 Answers

SOURCE: How to set kenneth cole unlisted digital watch with 4 buttons

OK I'll do my best to describe the procedure...

Part 1:
Press mode button till the seconds window blinks
Press Lap/Reset button once to make minutes blink
Cycle through minutes using Start/Stop Button

Part 2:
Press Lap/Reset button once again to make hours blink
Cycle through hours using Start/Stop Button

(for this part, it's a bit tricky. Hours can be displayed in AM, PM, or 24 hour duration. AM is represented by "A", PM is shown with "P" and 24 hour mode is shown with "H", so keep an eye in the seconds window when setting your hour so you know for sure if you have the right hour)

When your done setting minutes and hours, press mode button again till you get to main screen
A helpful hint is to remember when setting up anything in this watch, mode will cycle through the different screens, lap/reset will change the value of whatever your modifying (AKA minutes/hours) and start/stop scrolls through the different fields.

Hope this helps. Sorry if it's confusing, best I could do.

Posted on Dec 20, 2008

Ad

Anonymous

  • 1 Answer

SOURCE: Can't reset the time on digital watch

Hi,
I found the solution at http://www.watchliquidators.com/fossildir/Nike.asp

Hold down the button at the top left (the light) for about 4 seconds. The second part of the time will start blinking. I tried this before, I'm sure, but I must not have noticed the blinking and thought nothing was happening.
Once the seconds numbers are blinking, push the top right button (Start/Stop) to move to the hour or minute. Push the bottom right button (Lap/Reset) to change the time. When you're done, push the top left button (Light) again.

Posted on May 20, 2008

Anonymous

  • 1 Answer

SOURCE: Setting a generic one-button digital watch

I too lost the instructions for my generic 4 button digital watch and had to find the functions by trial and error and the results are below.

=========================

beb6348.gif
Adjust Alarm/Time/Date - Press and hold Mode Button. When alarm displays, release. Start-Stop Button SELECTS, Lap-Reset Button ADJUSTS selection. Pressing the Mode Button again changes from Alarm to Time/Date, ADJUST as above. Pressing it again exits.

Select/Deselect Alarm, Hourly Chime or Both - Press and hold Lap-Reset Button, Start-Stop Button TOGGLES through the above options.

Select 12/24 Hour Mode - Press and hold Lap-Reset Button, Mode Button TOGGLES through the above options.

Select Stopwatch - Momentarily press the Mode Button, use the Start-Stop and Lap-Reset buttons to control.

Display Date - Press Start-Stop Button in normal time
display mode.


Display Alarm - Press and hold Lap-Reset Button in
normal time display mode.


Cancel Alarm - Press Lap-Reset Button in normal time
display mode to silence alarm.


Hope this is helpful,
George.

Posted on Dec 23, 2007

Anonymous

  • 2 Answers

SOURCE: columbia watch - set time

Hope this helps!

I found it finally!!!

Good luck, I hope this helps you!!!

Columbia by Fossil Customer Service Contact
Contact this seller Phone: 800-449-3056

Posted on Jan 11, 2008

Anonymous

SOURCE: Setting Time on Aqualite 4 button 30M watch

Try this:

http://dive.scubadiving.com/members/gearreviews.php?s=593

Posted on Jul 05, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a digital wrist watch and I can not set it up.

hi Claude.
Press and hold the "Adjust" button to until the "Time" digits begin to flash. Use the "Start/Stop" and "Split/Reset" buttons to set your digital watch to the correct hour and minute increments. Press "Mode" to display the "Date" setting screen.31 Mar 2015

Digital Watch Instructions ' Techwalla.com

https://www.techwalla.com/articles/digital-watch-instructions

How do u set a digital watch?In normal time mode, Hold L2 for 2 seconds to alarm time set mode, then L2 again to normal time set mode, the second digits begin flashing. Press R2 to reset the seconds to "00", press R1 to switch to the minute digits. Press R2 to advance the minutes. Press R1 to switch to the hour digits.4 Button Digital Watch - Dakota Watchhttps://www.dakotawatch.com/PDF_FILES/Digital.pdfSearch for: How do u set a digital watch?

how to set digital wrist watch Google Search
Nov 27, 2017 • Watches
0helpful
1answer

How to set a Timex 1440 ports watch WR50M

Buttons are numbered as followed:
Start/Stop is button 1
Lap/Rst is button 2
Indiglo is button 3
Mode is button 4

a) Press 4 to select "TIME" mode
b) Press 2 and hold for 2 sec to select "SET" mode, second digits blink.
c) Press 1 to reset digits to 00.
d) Press 4. Minute digits blink
e) Press 1 to set minutes.
f) Press 4. Hour digits blink.
g) Press 1 to set hours.
h) Follow same patter to set day of month, month, etc...
i) Press 2 at any time to retain set values and exit procedureSource(s):Timex instruction manual
0helpful
1answer

How do i set up my watch correctly to the right time

Buttons are numbered as followed:
Start/Stop is button 1
Lap/Rst is button 2
Indiglo is button 3
Mode is button 4

a) Press 4 to select "TIME" mode
b) Press 2 and hold for 2 sec to select "SET" mode, second digits blink.
c) Press 1 to reset digits to 00.
d) Press 4. Minute digits blink
e) Press 1 to set minutes.
f) Press 4. Hour digits blink.
g) Press 1 to set hours.
h) Follow same patter to set day of month, month, etc...
i) Press 2 at any time to retain set values and exit procedure
0helpful
1answer

I can't set the time

Hi erbuckles,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

How to set time on a 1440 timex watch

Hi tsgoode99,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

Resetting the time!

Hi wizgrand576,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
7helpful
2answers

How do you set the time on the timex 440 sports watch

Hi markie_d,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

Would like to learn how to set time on on Timex 1440 sports watch

Hi danielrob676,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

1440 date change

Hi jhnmeserole,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
0helpful
1answer

We don't know how to set the 1440 sports watch

Hi katbil1,

To set the digital time and date on your Timex, please follow the steps below.

Timex Digital Watch

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.
Not finding what you are looking for?
Fossil JR9455 Watch Logo

13,061 views

Ask a Question

Usually answered in minutes!

Top Fossil Watches Experts

john h

Level 3 Expert

24045 Answers

Lisa Christine
Lisa Christine

Level 2 Expert

71 Answers

Morris Lindsey

Level 2 Expert

196 Answers

Are you a Fossil Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...