After I plug it into USB port what next?

it's out of order. Sometimes that happens to electronic devices

Just plug it in a USB port. Use Explorer to explore the drive. Locate the video.Drag and drop it on the desktop or anywhere else Users/MyVideo.

Try a different USB device on each of the USB ports on your computer.
Hopefully, all your USB ports are working correctly.

Try a different USB port on your computer.
Hopefully, the SanDisk will be detected on one of the ports.

Try a USB port on a different computer.
If the SanDisk still is not detected, then spend $10 to buy a new 4GB flash-drive.

your micro cruzer sandisk can perform lots of function .
You can copy your data,songs, video files on your flash drive to use it any time any where .You can do this by just following the simple steps :
1. Plug the USB flash drive to a USB port.
2. A USB flash drive icon will appear on the desktop


3. Double-click on your Cruzer USB flash drive.
4. Select the files or folders you want to copy to the USB drive by clicking on them.

5. Drag and drop the selected files or folders to the USB flash drive icon.
Note : Do not immediately remove your drive from the USB port,right click on drive icon in notification area then click on safely remove the drive ,then remove your drive from your computer.
2: You can take backup of your computer on your flash drive
3.You can also boot from your drive if *********** board support boot from from your flash drive.

you plug the SanDisk Cruzer Micro 4GB USB 2.0 Flash Drive into your computer open the file that says SadDisk and drag the files you want to download into the SanDisk file good luck!! :)

Hello,
Plug it through different USB ports, even a USB Hub, or on a different computer. Sometimes rebooting solves the problem. I suspect it is a USB problem, especially on laptops with a small number of USB ports.
I have given mine up as dead several times, but it always comes back up gain.
Hope it helps.

Hi there,

Try plugging it in to a different USB port on your computer. Make sure the connecter on the Cruzer is clean and there's no dust inside.

Also, try plugging it in on a different computer.

If none of these work,
I'm afraid it's a hardware problem and there's nothing that can be done about that.

Hope I helped!
Tom

I'm not an expert with PCs, but I have a windows 98 Operating system and have been able to use all sorts of flash drives. Everytime I buy a new one, I just plug it into the USB port and in a short time it recognizes NEW HARDWARE and loads the driver. I've used LEXAR 2GB,SANDISK 4GB, VERBATIM 2GB, and recently a ATIVA 4GB

Are you connecting it to the back of your computer? Sometimes the port in front does not have enough power to power it on.Also please try another computer

my os is win 98 i want 98 drivers