Question about Jenn-Air Electric Single Oven

Oven door falls open and will not close tight on my Jenn-air Single oven Model #SVE47100w

1 Answer

Philip

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Master
949 Answers

Hi,

The hinges and receivers would need to be replaced on this. The hinges are part number 71003351 you need 2, they go inside the door, so the door would need disassembled.

The receivers (hinge receptacles)are part number 71002206 you need 2 also, these go on the side of the oven. You will need to pull the oven out a few inches to gain access to these

Posted on Jul 24, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Jenn-Air W30400P door does not shut tight most of the time. Light comes on when the door is not tight. How do I fix this problem?

I think that must be a design flaw with that model. I have one, and it does the same thing.

May 15, 2010 | Jenn-Air W30400P Stainless Steel Electric...

1 Answer

We have a 30 in prostyle electric double wall oven - the oven takes forever to preheat and the doors do not seal tightly when they are closed.

Hello- Many ovens use spring-loaded hinges to carry the weight of the door. Over time, these springs weaken or the hinge gets bent just enough to not fully close door. The door gasket can also become flat and stiff, compounding problem. Any small gap releases heated air, and oven will not heat up properly. Replacing the door springs should solve problem.- Thanks -Ed

Mar 14, 2010 | Jenn-Air 30 in. Pro-Style Electric Single...

1 Answer

How do i remove a jenn-air built in wall oven? (older oven model W131B)

IF YOU OPEN THE OVEN DOOR THERE SHOULD BE SCREWS FROM THE SIDE OF THE OVEN INTO THE CABINETS THERE COULD BE MORE THEN SIX

If you need further help, I’m available over the phone at https://www.6ya.com/expert/dude_653d05454b389bba

Mar 07, 2010 | Jenn-Air JJW8330D Electric Single Oven

2 Answers

Door will not close all the way...

This is likely one of two problems. Either the fiber gasket is getting in the way or if it is like ours one of the hinges is broken or bent. The Hinges can be replaced for about $13 a piece and is not a difficut job. On our the oven was also opening more then 90 degrees and wouldn't close more then to about 1.5 inches away from full closure.

Jan 09, 2010 | Jenn-Air WW30430P Stainless Steel Electric...

1 Answer

One of the oven doors does not close tight so heat escapes. It is a Jenn Aire electric double wall oven model number JJW9627DDS.

Sounds like the oven door hinges have worn. If door is not obstructed in any way and will fully close when pushed but open about half a inch when released then it will be the hinges. Not sure of cost of spairs. I believe this to be a John Lewis Model. If it has a Enr no inside the door or inbetween the door hinges then I could give you price on spares

Nov 15, 2009 | Jenn-Air JJW8230D Electric Double Oven

1 Answer

My oven Door fell off. it is a Jenn-Air JJW9530C

This is a known issue. The model number is JJW9530C. I have been browsing the internet trying to find stronger hinges but with no luck. It seems there are a lot of unhappy Jenn air owners. You are correct in your assumption that the door is to heavy for the hinges. I will post the websites for your review

http://www.ovensworld.com/jenn-air-jjw9530c-expressions-collection-electric-single-oven.html

Maybe if I could see the hinge I could fabricate a stronger stainless steel one for you

Apr 27, 2009 | Jenn-Air JJW9530C Stainless Steel Electric...

5 Answers

Jenn-Air electric wall oven door opens slightly when in bake mode

you either have a bent door hinge or a broken door spring.
check the hinges by opening the door and see if it opens past 90 degrees. if it leans towards the floor then the hinges are bent.
if not then your door springs are broken off. you can check this by seeing if the door "feels" heavy when opening.
either way the door should close tight against the frame when up and the light should not come on without opening the door.

Jan 22, 2009 | Jenn-Air 27 in. Electric Single Wall Oven...

1 Answer

Jenn-aire JJW8530dds

It might be because when the door was completely removed ( which they do rather easily for repairs and moving) it wasn't put back properly.
I would suggest you remove the oven door and re install.
You do not remove any screws or anything like that to remove the oven doors.
When you have the oven door open squeeze each hinge and shift then both outwards it will release the door from the hinge, the hinge stays on but the door will slide off the hindge. Afterwards check the alignment and reinstall the oven door

Aug 02, 2008 | Jenn-Air JJW8330D Electric Single Oven

2 Answers

Jenn air oven stuck closed after attempt to activate self-cleaning

The lock motor may have failed. Most often, bending a coat hanger into a hook and sliding from the right side as you move the door to the right,will allow you to release the lock and open the door.

Jun 09, 2008 | Jenn-Air JJW8130D Electric Single Oven

1 Answer