Whirlpool Ultimate Care II LSQ9564J Top Load Washer Logo
Posted on Jul 23, 2010
Answered

Every once in a while a plume of rust get injected into the washer or rinse cycle. Are their components on this washer that can develop rust for this to happen? The model # of this Whirlpool machine is LSQ9544kQO The shut off valves and the hoses have been changed, along with the water heater connections (not the water heater it self). Also I checked the fabric softener compartment and where the bleach is poured in to see if any rust was growing in those areas. In the back of the machine, I disconnected the hoses and checked the little round screens. After cleaning the screens, no rust was visable. I even layed the washer on it side to see the guts of the machine and see if any rust was growing. Everything looked good. Am I missing anything?

Answer This Question

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 10 Answers
  • Posted on Jul 23, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.
New Friend:

An expert that has 1 follower.
Corporal:

An expert that has over 10 points.
Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 23, 2010
Answers
10
Questions
0
Helped
4294
Points
23

No depending on your citys growth rate and repair rate of the lines underground this happens to homes everyday. Another real possibility is your water heater you have not replaced. put an inline water filter on and you will be happy 2 ways no rust and better feeling longer lasting clothes

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

Washer fills with water during spin cycle
Go to repairclinic.com and have model number ready. They have videos how to check it
Read full answer
Mar 02, 2015 • Samsung WA422PRHDWR 4.2 cu. ft Large...
0helpful
1answer

Maytag washer lat8600
That model doesnt come up on Matags web site?
Read full answer
Nov 25, 2013 • Whirlpool Washing Machines
0helpful
1answer

Hotpoint Washer
if you have rust underneath washer its time to replace same.
Read full answer
Nov 28, 2011 • Hotpoint Washing Machines
1helpful
1answer

Water not filling in tub washer spins,
It sounds as if the timer has failed internally. Spinning on each setting means the motor is not reversing and that reverse function is controlled by the timer itself. It would never fill if it is stuck in spin unless you select rinse and depending on cycle it can inject water in the spin during the final rinse. If your machine does this normally see if it injects water. If it does inject water at that point I am 95 % sure your timer is the problem.
Read full answer
Jan 11, 2010 • Maytag Atlantis MAV6000 Top Load Washer
0helpful
2answers

F&P washer lights on and beeps
Clogged pump stopped up drain. If the washer does not think all water was pumped out in 8 minutes then it shuts down. Slow drain is my first inclination.


If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Read full answer
Dec 31, 2009 • Fisher Paykel EcoSmart GWL15
0helpful
1answer

I have a Hotpoint Aquarius WD62...I moved house and when i re-plumbed the washer in, it washed o.k twice then it developed a problem.. When the wash cycle reachs the rinse cycle it does not add water to...
Sounds like it's the printed circuit board . About £40 to fix
Read full answer
Oct 11, 2009 • Washing Machines
0helpful
1answer

Will not go through the rinse cycle not filling
your cold water is turned off  if you check its not than where the hose connects to washer for cold water disconnect it and make sure its clean in the hose and the part of the washer it connects to  there might be rust if it is clean than you need a new water valve
reply if u got questions
Read full answer
Jun 06, 2009 • Danby DWM99W Top Load Washer
1helpful
2answers

AEG WASHING MACHINE
fit hoses at random. put on a rinse cycle. if cold water comes in then hoses are correct. if hot water comes in, then reverse hoses
Read full answer
Aug 22, 2008 • AEG Lavamat 72640 Front Load Washer
0helpful
1answer

Shutting down on rinse cycle
Hi this could means that you may need to replace the washing machine bearings. Once the bearings are bad, the motor overheats and it will automatically shut down after the first rinse.

Timonty from WashingMachineAdvisor.com
Read full answer
Jul 28, 2008 • Kenmore 44072 Front Load Washer
0helpful
2answers

Whitish Residue
no its a hard water problem cut the amount of detergent by 1/2 but no less than a teaspoon make sure your rinse aid dispenser is full and once a year do a winger rinse use air dry or energy saving option put two cups of vinegar in a dishwasher safe measuring cup on the bottom rack.run a complete washing cycle using the air dry option no detergent the vinegar will mix with the water.run the washer through a normal cycle with detergent after cleaning the washer with the vinegar rinse this can be done once a year
Read full answer
Jan 26, 2008 • Dishwashers
Not finding what you are looking for?

View Most Popular

Ultimate Care II LSQ9564J Top Load Washer

  • Washing Machines

Related Question

Washer fills with water during spin cycle

  • Samsung WA422PRHDWR 4.2 cu. ft Large Capacity Top Load Washer - White

Related Topics

146 views

Ask a Question

Usually answered in minutes!

Popular Questions

Whirlpool Duet Sport Washer will not drain - F-21 error

Whirlpool Duet GHW9150P Front Load...

F 11 error code on Whirlpool Duet - Serial Communication Error ?

Whirlpool Duet GHW9150P Front Load...

Whirlpool cabrio error code f51 what does it mean?

Whirlpool Cabrio WTW6600SBK

Whirlpool Duet Washer-error code "sud"

Whirlpool Duet GHW9150P Front Load...

Whirlpool duet washer-error F06 and E02

Whirlpool Duet Steam WFW9750WR...

Top Whirlpool Washing Machines Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...