My stove keeps turning off and the display says ed -f2- when i push off/cancel the time comes back on but 1 minute later it goes back to ed -F2- when i unplug the stove for over 30 seconds the same thing happens. When i press the oven button it goes to loc and i return it to the time 5 minutes later the oven goes to ed -F2-. How do i get the stove to work??

SOURCE: F2 message when self cleaning

I have the exact problem, had a service man look at it while still under warranty. He said it was fixed and left. Tried it again, same problem. Called him back 2 times after that, he quit responding to my calls. By tyhen warranty expired and GE refused to do anything.

SOURCE: F2,F5,F7 message

MAYTAG
Range/Stove/Oven Fault Codes Failure
Code Condition Check/Repair F1 Defective touch pad or membrane Replace touch pad or membrane (usually the touch pad)* F1 Watchdog on board Replace touch pad or clock assembly (also called the ERC) F2 Oven too hot Replace relay board (if present) or bad oven temperature sensor F3 or F4 Open or shorted oven temperature sensor Replace oven temperature sensor F5 Hardware and watchdog circuits disagree Replace clock assembly (also called the ERC) F6 Missing AC signal Check for proper voltage F7 Function key shorted or stuck button Replace touch pad or clock assembly (also called the ERC) or un-stick button F8 Analog/Digital supervisory Replace clock assembly (also called the ERC) F9 Door latch supervisory Check door lock circuit or replace clock assembly (also called the ERC) F0 Function key stuck Replace touch pad or clock assembly (also called the ERC)

SOURCE: F2 E3 error code- Oven won't turn on now

Hi,
I ended up calling a technician to come out and look at it. He said that the front panel where you push all the buttons went out and I would need to get a new panel.

Starnley Johnwells

• 1031 Answers
• Posted on Mar 31, 2009

SOURCE: ge stove flashes f2 and beeps

F2 is a oven sensor error . remove and or replace the oven sensor if doesn't stop replace oven control

SOURCE: F2 error

Turn off the breaker to the oven then turn it back on. The beeping will stop and the oven will continue to cool.