When a photo is taken the image is over lit and whited out. Help!

If the images look OK when downloaded to your computer, then the fault lies in the camera. If, however, they look the same, then you need to look at either your exposure or white balance settings.

Not really a solution yet but we really don't know if the problem is with your camera or your printer. If you can, remove your memory card and take it to your nearest photo retailer (I like WalMart). Ask the technician there to help you make a photo of the offending image. If the background is gray on the new photo, the problem is with your camera. If not, it is likely your printer.
Your camera may have settings that can be adjusted as well.
Also, if you're using standard copy paper instead of photo paper to print your picture, there may be color issues as well.
Hope this helps.

If that is the only problem with the photo, you can use Photoshop to change the pink to white. You will need to go to Image/Adjustment/Levels. Use the eyedropper on the right to click in the pink space to make that white.

The other option is to see if the bottles are bouncing color on to the white. You may want to tape some white paper to the sides of the bottle (out of camera view) so the bounce is only white.

It is known problem of bad ccd imager in Sony DSC-T1 camera and ccd imager chip will be replaced to get normal live view in camera mode.
Sony will repair it free of cost so click Sony CCD Imager Support for details.
Thanks.

hi, its a problem of lence flap,it is in the lence berral , just change the lence flap and your camera is ok,remember if you are a tecnition then try your owen

shutter is sticking so it over exposes photos . will need shutter or lens assembly replaced. it will have banding stripes in low light and white in bright light.

This is a CCD sensor problem ( see enclosed image of one taken out of a Cannon camera with similar specs to yours ). Contact Fuji agent as this is repaired under warranty .

try setting your camera's auto balance into Automatic or Outdoor. So the camera could adjust the light or diable flash.

This sounds like it might be a defective CCD imager. If this progressively gets worse, Canon should fix this for you for free, including free shipping both ways. This is regardless of your cameras warranty status. Please check the following two links for more info:
http://camerarepair.blogspot.com/2007/11/canon-digital-cameras-showing-black.html
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&fcategoryid=225&modelid=13390&keycode=2112&id=29819
Applicable cameras include:
A40, A60, A70, A75, A80, A85, A95, A300, A310, S1 IS, S60, S200, S230, S330, S400, S410, S500, SD100, SD110

I have an s60 and it sounds like I had this exact problem. Whenever I took a photo, the entire picture was covered with white horizontal lines. The actual image files were striped the same way.

I found this on the Canon USA site:
http://www.usa.canon.com/consumer/controller?act=PgComSmModDisplayAct&keycode=2112&fcategoryid=223&modelid=10149

Because it was a hardware issue, they sent me a shipping label, I sent in the camera, they fixed it, and sent it back. All free of charge.

Good luck; I hope your camera is repairable.