Question about Denon AVR-2802

2 Answers

Suddenly after 8 years there is no sound coming out of my Denon AVR 2802 Amp. The inputs are right it is on Auto to pick up digital inputs and none of the inputs are working, really annoying. I have heard the "click" after I turn on as usual to know it is ready but nothing. Help please

Posted by ben_lukawski on

Ad

2 Answers

Scott Frye

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,175 Answers

Actually, Denon used a thermal fuse in the primary of the power transformer. Have a tech check the primary winding and see if it's open. if so , have it bypassed

Posted on Aug 19, 2010

Ad

Levi Casaol

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 387 Answers

Check out for audio amplifier, touch the integrated circuit o transistor for overheating, if no heat inside, visually check some solder loose, check the supply voltage going to power amplifier, touch the audio input if there will be a sound produce while touching, if there is no effect change the component parts deffective

Posted on Jul 22, 2010

Ad

3 Related Answers

Anonymous

  • 5 Answers

SOURCE: Also problem with Denon AVR-2802

If DIGITAL sign on the display blink, it mean the DSP board is defective. probably the DSP itself

Posted on Aug 29, 2008

Dennis McCollum

  • 137 Answers

SOURCE: i have a denon avr 2802. the remote powers the

Try doing a factory reset by turning off main power switch.hold down speaker a and b buttons while turning on main power switch ,display will flash 3 time s then release buttons,this then returns unit to factory default settings.

Posted on Apr 14, 2010

dunnbiker

David Dunn

  • 8546 Answers

SOURCE: i have denon avr-2802.. suddenly no sounds will

Register and download the manual for free at retrevo.com


http://www.retrevo.com/support/Denon-AVR-2802-Receivers-manual/id/363bh830/t/2/


Is it silent for ALL inputs including the Test Tones?


Page 33


Function incorrect, Muting, Tape or EXT Input on when it shouldn

Posted on Feb 19, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Denon AVR-2802 Optical Issue

If you look at page 16 of the user manual it tells you how to assign the devices to the optical connections. Once this is done it should work.
If you don't have the manual just type "denon avr 2802 manual" into Google and it will show a free PDF file of it. On my search it came up first!
0helpful
1answer

I have denon avr-2802.. suddenly no sounds will come out but the power ok.. help me pls..

Register and download the manual for free at retrevo.com


http://www.retrevo.com/support/Denon-AVR-2802-Receivers-manual/id/363bh830/t/2/


Is it silent for ALL inputs including the Test Tones?


Page 33


Function incorrect, Muting, Tape or EXT Input on when it shouldn

2helpful
1answer

I have a denon avr 2802. the remote powers the

Try doing a factory reset by turning off main power switch.hold down speaker a and b buttons while turning on main power switch ,display will flash 3 time s then release buttons,this then returns unit to factory default settings.
0helpful
1answer

I am trying to connect my wii to my denon avr-2802 using the wii's composite cables. i get sound but no picture. help.

After connecting the Wii cables, connect a video cable to the "monitor out" connection to a compatible input on the TV.

0helpful
1answer

Hi, i have the Denon AVR-2802 reciver. My issue is when i plug my xbox into the dvd compontent inputs, i cant get any audio or video. I was working a few days ago, i had to disconnect the amp, when i...

Component inputs are for video only, and when connected through a receiver then the television also must have a video input coming to it from the video out from the receiver. If you want audio that will be a separate connection from the xbox to the receiver either by digital coaxial cable or optical cable, or composite.

1helpful
1answer

Denon 2802 amp

Dear Armani,

You cannot put de leads from an MP3 player or your TV into the pre-amplified connection of your Denon,
the phono "stage" is a low input stage, your input from MP3, TV, CD, DVD oscasetteplayer is high output (a 5 to 10 times stronger signal)
Try every other stage like tape 1 or 2, this will work just fine,

succes
0helpful
1answer

No sound coming out from ANY speaker

muting is on switch off muting.
---volume control is in low level------turn volume up.
------input signal of audio source not selected------select your audio source.

0helpful
2answers

Denon AVR 2802 - Unit Turning Off

If DIGITAL sign blink, this mean DSP board is defective. It will cut the sound on the AMP section. DSp is maybe defective.
0helpful
1answer

Also problem with Denon AVR-2802

If DIGITAL sign on the display blink, it mean the DSP board is defective. probably the DSP itself
7helpful
3answers

DENON AVR 2802 (NO SOUND)

If "Digital" sign blink on front panel, it means DSP do no start properly. If DSP do not start, main UC mute audio. Change IC, AT49LV002-70TC (IC 817 ) at DSP board (Denon P/N: 262 3010 006).



Not finding what you are looking for?
Denon AVR-2802 Logo

1,513 views

Ask a Question

Usually answered in minutes!

Top Denon Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5720 Answers

The Knight
The Knight

Level 3 Expert

76708 Answers

 Francisco Mauricio...
Francisco Mauricio...

Level 3 Expert

1551 Answers

Are you a Denon Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...