Double vision i have a PT-47WX49E IT HAS LIKE A BLUE AROD AND GREEN SHADOWS LIKE IM SEEING THREE SOMETIMES WHAT COULD IT BE

It is the convergence module that needs change, that is what is causing the red green and blue to be out of alignment. You need to change the module.

if convergence does not adjust in menu mode could be a defective convergenceic or fuse

Have a qualified repair shop come have a look and give you an estimate. If it's the optical block it's probably not worth repair.

you need new convergence chips, there are 2, part number stk 392-110, also you must check for burnt resistors, if you don't have very good soldering skills at least, you will need a tv repairman.

You probly have a convergence cicuit failure. Replacing the convergencr IC's will probly fix it.
I recommend a professional repairman to
do it though. Particularly if it needs further adjustments after the IC's are replaced.

You need the panasonic convergence repair kit #1 which comes with instructions with pictures. Heres a link to the correct kit for your model.
http://servicemanuals.vstore.ca/product_info.php/pName/panasonic-projection-tv-convergence-repair-kit-1/cName/convergence-repair-kits

You need to replace the convergence ICs. Please post your model number and i will list the correct ICs for your model.

You need to replace the two convergence ICs they are STK392-110 you can get replacements at the following link with fre installation instructions.
http://servicemanuals.vstore.ca/

MY TV WON'T COME ON? MY POWER SURGE WORKING IS WORKING.

your convergence IVs need to be replaced. Its an easy repair if you can solder. you can get the two ICs you need at the following link. they also provide free installation instructions and free on line tech support while youre doing the repair. You need two ICs they are numbers STK392-110. Let me know if I can be of further assistance. I am one of servicemanuals support techs and board rebuilder.
http://servicemanuals.vstore.ca/