New Aqualand promaster dive watch JP1010-01L. Temperature currently displayed in C. How do I change display to F.

click on the link below for more infomation on charging your citizen watch
http://www.citizenwatch.com/en-uk/support/recharging-guide/

My Cyber was working fine and reporting a full charge, but when diving, it would stop working and go into safe mode. I sent it in to Citizen and they replaced the cell, now all is good again.

i have a clock model aqualand c500, and apearence the this problem "err" on display down. i can reset, but don't work. I'll leave in assitance.

What do you mean by adjust it. Do you mean to set the time or are you trying to do something else?

Try hitting the backlit button. If your computer resets or dies, you have a battery issue.

When the amount of available memory in flash memorybecomes low, "FILE" flashes in the lower left corner ofthe display in all of the submodes of the standard mode as well as in the dive mode. Thewatch automatically switches to the flash memory statusdisplay of the system monitor mode when the water sensor gets wet while thiswarning function is activated. Please note that although it is possibleto use the watch for diving in this state, log data may not be recorded inflash memory during diving. The file error warning function is also activated andadditional log data is not recorded if the duration of a single dive exceeds 2 hours or if morethan 15 dives are made in a single day. The file error warning function may also be activated whenthe water temperature during diving is low. It may not be possible to receive watchsettings by data communication while the file error warning When the watch has switched to the file error warningdisplay, perform the garbage collection procedure in the system monitor mode of the standardmode. Thedisplay returns to normal following completion of garbagecollection. Garbage collection begins when button (C) is pressedfor at least 2 seconds during the flash memory status display. • During the garbage collection operation, an alarmsounds and "G.C." is displayed on the display. When garbage collection is completed,"Done" is displayed on the display. • Garbage collection cannot be performed when"G.C." has changed to "NG" on the battery charge indicator or when the water sensor hasbeen activated. "Fail" is displayed on the disPress button (B) in the system monitor modeof the standard mode to switch the watch to the Flash Memory Status Display. Formatting Flash Memory Formatting of flash memory begins when button (B) is pressed while pressing button (C) simultaneously forat least 2 seconds.play at this time. [email protected]

Thanks for contacting FixYa.
You should be able to find here:

http://www.citizenwatch.jp/

Best regards. Jewel

You can get instructions from the Citizen web site.

Go to "citizen.com" and on the upper right there is a menu. Click on "technical support" and then on "setting instructions"

Fill in the information required from the back of your watch and then click on "get setting instructions"

Hello FixYa,

How I solved the problem ???

Read my former post again.

I thought this could help you with your troubleshoot database.

Ragards, Marc

https://oureverydaylife.com/citizen-promaster-instructions-12296146.html