How to reset to manufacturing setting - Canon PowerShot S60 Digital Camera

you have to go into setting and set to manufactures settings. look for pin hole that states reset

now if you have a password already and you setup the password already that trying to bypass the password setting you will need the password in order to get to those setting i think.

you could go to website for the manufactures look up lost pass word bypass, or FAQ section, or if technical support can help you if you done all this already .

I would usually search the manufacture website for the mother board specs and FAQ's. Usually incorrectly setting the cmos/bios and rebooting fails several times, it will reset to the manufactures default settings. I have needed to use another monitor if the PC has more then 1 VGA or higher def port to see what the messages are reporting. There are other control and function key combos, varies by manufactures.

you can wipe it as for removing code that is not going to be possible, to reset to manufacturer settings there is a pin hole on the back push this with a pin in the hole and turn on the unit this will reset to manufacturer settings, you may still have all your stuff on there but the settings will be back to new and you will need to set them back up after.

An operating system ? and make of computer ? would be nice to know so someone could give a precise solution.

Reset your desktop computer to make your operating system work better. Reset a desktop computer to its defaults to override unwanted changes. Reset your desktop computer settings to the browser default settings to ensure safe use of the Internet. Always try to resolve your computing troubles by resetting your desktop computer.

Use your desktop computer's recovery system to a time when the system was working better. To reset your desktop computer to a store point, left-click the "Start" menu, point to "All Programs," and "Accessories," and then "System Tools." Click on "System Restore." Click on the option to "Restore," then click the "Next" button. Click "OK." You may also use the feature to "Set Restore Point" for future needs. In the next step you will clean up your file paths and file space to ensure that your computer is running the operating system smoothly. Click on the "Start" menu. Point to "All Programs." Point to "Accessories." Point to "System Tools." Click on "Disk Defragmenter." Click on the "Defragment" button. Close the Defragment program. Your computer will run like new. It is a good idea to restart your computer. Close all programs, then click on the "Start" button. Click "Turn Off Computer." Select "Restart." Click "OK." b> Reset a PC for the Manufacturer, Microsoft, or Non-Microsoft Program Defaults b> Click the "Start" button. Point to "All programs." Click on "Set Program Access and Defaults." Click on "Computer Manufacturer" to reset your desktop computer to the manufacturer's settings. Click on "Microsoft Windows" to reset your Internet Explorer and MSN Messenger settings. Click on "Non-Microsoft" to reset Mozilla Firefox settings. Click "OK." Your browser, email, and instant messenger settings will now be reset to the manufacturer's specifications.

Im presuming its your internet connection password ?

Your Internet service provider (ISP) requires a username and password to access service features, including Internet and email.

Your ISP should provide this information when you set up your Internet service.

Typically, once you complete the setup and save the information, your router or modem transmits it behind the scenes when you try to access the Internet.

As a result, the username and password can be easily forgotten because they are not used daily.

If you reset your router or simply forget the password, gaining access to network resources and the Internet becomes a challenge.

Call your ISP's technical support department.

Many ISPs set a default username and password for their routers.

If you didn't change the username and password, your ISP can provide the original information.

Before you hang up, make sure the information is correct by entering it and trying to connect to the Internet.

If the information is incorrect and you still cannot get a connection, keep the information for later reference.

Call your router's manufacturer.

The manufacturer of your router sets a username and password prior to shipping the device to your ISP.

Look at the router for the contact information of the manufacturer.

Call their customer service or technical support department and ask for the default information.

Reset your router.

If you changed your router's username and password and cannot remember what you entered, you may have to reset the router.

Insert the resource CD into your computer's CD drive.

When the software installation program starts, search the screen for "Resources" or "Documentation" or "User Manual."

Click the documentation link and search the table of contents for resetting the router.

When you reset the router, the username and password return to the default set by your ISP or manufacturer.

Enter the information provided by your ISP or manufacturer.

Hope this helps.

go to set up.by pressing ctrl+alt delete then go to default setting

This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset (option 1)

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
3. Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:

This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
Hard reset (option 2)
You can also use Clear Storage to reset your device back to factory default settings.

1. On the ?TouchFlo3D Home screen, slide to the Settings tab and then tap All Settings or goto Start and press Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

Hard reset (option 3)

1. Pull out the stylus.
2. Turn device OFF.
3. While pressing the CENTER button, turn the phone on with the POWER button.
4. Continue pressing the CENTER button until you see this message on the screen:

This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
This works on at least some Verizon CDMA phones on which option 1 will not work.
Hard reset (option 4)

1. Pull out the stylus.
2. With the device turned off, press and hold the VOLUME DOWN and CENTER buttons, then press and hold the POWER button.
3. Continue pressing the POWER, VOLUME DOWN, and CENTER buttons until you see this message on the screen:

This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel. (works with Alltel touch pro)

This will wipe all the storage (not the sd card) and your device will be reset to default settings.
Hard reset (option 1)

1. Pull out the stylus.
2. With the device turned on, press and hold the VOLUME DOWN and CENTER buttons, then press the RESET button with the stylus tip.
3. Continue pressing the RESET, VOLUME DOWN and CENTER buttons until you see this message on the screen:

This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
Hard reset (option 2)
You can also use Clear Storage to reset your device back to factory default settings.

1. On the ?TouchFlo3D Home screen, slide to the Settings tab and then tap All Settings or goto Start and press Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.

Hard reset (option 3)

1. Pull out the stylus.
2. Turn device OFF.
3. While pressing the CENTER button, turn the phone on with the POWER button.
4. Continue pressing the CENTER button until you see this message on the screen:

This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel.
This works on at least some Verizon CDMA phones on which option 1 will not work.
Hard reset (option 4)

1. Pull out the stylus.
2. With the device turned off, press and hold the VOLUME DOWN and CENTER buttons, then press and hold the POWER button.
3. Continue pressing the POWER, VOLUME DOWN, and CENTER buttons until you see this message on the screen:

This operation will delete all your personal data, and reset all settings to manufacturer default. Press ?VolUp to restore manufacturer default, or press other keys to cancel. (works with Alltel touch pro)

take out battery for few seconds and put the battery back in, power on and try if it made any difference. if does not work, reset the phone to its original manufacturer setting. Go to

try deleting some of our old text messages if it would make an difference. if not,take out battery for few seconds and put the battery back in, power on and try if it made any difference. if does not work, reset the phone to its original manufacturer setting. Go to