Question about Infinity Reference 611a Car Audio Amplifier

Need to know how to wire my system ...I have the infinity reference series 611a I was told it was a mono block but it has two channels on the exterrior...also I have two 12 inch MTX thunder dual voice coil subs ( not sure if there the 4500 or 5500) ...neways I need to know how to wire this up to be the loudest and I have 4gage and 6 gage wire also several feet of 10 gage . Installing today need to know. Also I'm getting ride of my JL w1 12s ..(2of them) for these MTX. Did I make the right decission .

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.
Expert
70 Answers

It all depends on what kind of box the mtx subs are in as far as wiring the subs. The best way would be take the speaker wire from both sub boxes and run the positive into the right positive then the negative into the left negative. and run 8 gauge wiring kit to the amp because 10 might be to small and 4 is to big 8 gauge is perfect for this amp.

Posted on Jul 28, 2010

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Best way to wire a Infiniti reference series 1052w dual voice coil sub to the infinity reference series 311a amp

Bridge the sub in parallel. Connect the positive from one voice coil tithe positive on the other voice coil and then to the positive on the amp for bridge mode. Then do the same to the negative. It will put you at 2 ohm mono in bridge mode.which will give you full power the app can give around 312 watts.

Jan 11, 2014 | Infinity Reference 311A 300 Watt Subwoofer...

1 Answer

Infinity Reference 611a need wiring diagram

Haynes manual or chilto if not got to infinity parts counter and they can help

Feb 21, 2013 | Infinity Reference 611a Car Audio...

1 Answer

I want to hook up a mono amp to my Infinity 475a 4 channel amp. It contains a rca output site on the Infinity to plug in the mono amp. Do I still need to have seperate ground, fuse and power cables for...

Yes, it will be a complete amp instalation.

Aug 24, 2011 | Car Audio & Video

1 Answer

Infinity 611a, after i connected all the cables, the "power" light on but no sound. i tried my old amp and everything was fine and i check the fuses on 611a they're good. anybody know how to...

If you put a different amp in its place with all wires run the same than your Infinity ampis blown. It is now a large paperweight.

Dec 23, 2010 | Infinity Reference 611a Car Audio...

1 Answer

How do I hook up my infinity 1600a at 2ohms with 2 4ohm speakers?

Placing the speakers next to each other face down, you will notice that the connection points run in sequence +- and +-. Now connect the - (negative) from the one speaker, to the + (positive) of the other speaker. Now connect the open + from the one speaker and the open - from the other speaker to your amp. Your amp should have a bridging indication. On the connection points of the amp, you should see a mark pointing to the first + and the last -. That will be your bridge and thus utilizing the full potential of your amplifier

May 21, 2010 | Infinity Reference 1600a Car Audio...

1 Answer

Infinity 336rms amp worked for over a year then one day stopped?

check your fuses. Also check the power wire connection to the amp and then the ground source maybe move that if there is paint under it. check fuses on the amp. Check ohm load to the amp from the speakers.

May 27, 2009 | Infinity Reference 611a Car Audio...

1 Answer

Cant get power to my amp

remote wire? check amp fuse maybe weak ground sometimes location looks good but is weak

Apr 30, 2009 | Infinity Reference 611a Car Audio...

1 Answer

1211a amplifier

if your amp. work in bridge you can attach + 1st channel and + 2st channel to your sub woofer. by series 2 ohm you have 4 ohm sub woofer.

Sep 26, 2008 | Infinity Reference 1211a Car Audio...

1 Answer

2 ohm dvc and monoblock sub amp

Yes. When you run two-two ohm subs to a monoblock amp its on the same channel meaning there ran parallel, and that makes it one ohm and most mono-blocks won't read one ohm. Are you popping fuses in the amp?

Apr 02, 2008 | Audio Players & Recorders

3 Answers