At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have the same issue, but I cannot use the solution posted because my keyboard is not responding, as well. When I unplug it and plug it back in, the lights flash, and then it goes dead again.I have the same issue, but I cannot use the solution posted because my keyboard is not responding, as well. When I unplug it and plug it back in, the lights flash, and then it goes dead again.
AnonymousJan 21, 2009
I have a Compaq Presario sr1810nx and it freezes at the compaq startup screen. I cannot enter BIOS or do anything accept unplug it. Help!I have a Compaq Presario sr1810nx and it freezes at the compaq startup screen. I cannot enter BIOS or do anything accept unplug it. Help!
AnonymousJan 26, 2009
ok whatdont you understand about KEY BORED NOT RESPONDING
ok whatdont you understand about KEY BORED NOT RESPONDING
AnonymousMar 12, 2014
how do i get into my bios on my Compaq Presario Media Center SR2011WM Desktop PChow do i get into my bios on my Compaq Presario Media Center SR2011WM Desktop PC
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
1 - You may need to roll back system with System Restore. Under Safe Mode (press F8 during boot and choose safe mode). Win 7 - Start > Search type System Restore XP - Is Start > All Programs > Accessories > System Restore. Now choose a date prior to problem. You may have to try a few dates.
2 - Try disabling startup programs. Go to Start > Run (search in Win 7) and type MSConfig. Startup tab and uncheck anything that you don't want Windows to load automatically. It will make Windows boot faster and use less resources while running. This just disables them in startup. Programs will still load, but when only you initiate.
when turning on the system go into the BIOS and reset back the seeting s to factory defaults and reboot the system .. If this fails then reseat the Hard drive may have come loose or ?
did you recently add new software ? drivers ? hardware?
See if you can get into safe mode. If you can't then your system files are corrupted and you'll have to restore your computer back to factory defaults.
I believe on your compaq presario they have a built in factory restore and its either accessed by the F10 or F11 key when you first turn on the computer. You'll know when you first turn on the computer at the compaq logo screen.
It appears that the hard disk drive is not being seen in the Bios. Ensure that both the power and data cables are connected to the drive and the controller. try booting again.
my compaq presario 5000 desktop will start and get stuck on the compaq logo screen with a cursor in the right hand corner.I try pressing F6 and it won't do anything.I tried other keys and it does nothing.Apparently my granddaughter told me ther was a message came up sayinf computer is locking up.Any help will be appreciated.
Barb
Seems the screen is slow to start up, right after pressing the power button, keep tapping on f1 or f10 untill the bios screen or something else comes up. that will definitely get you into the bios and dont mind if the computer starts to beep, slow down a little and keep tapping.
if in the starting it is showing two operating system then make sure that which one is working and which one you want to remove
then boot your system with xp and right click on the my computer icon> go to properties >click on the advanced tab > then choose startup and recovery setting > there you will see defaukt operating system if it is showing two operating system then remove the OS which you dont want. Be careful to use this option.you can reduse the time limit also.
Can you describe the issue ion more detail?
Do you see a startup screen with the Windows Logo? Does the logon screen come up? Does the computer get out of the BIOS startup?
I have the same issue, but I cannot use the solution posted because my keyboard is not responding, as well. When I unplug it and plug it back in, the lights flash, and then it goes dead again.
I have a Compaq Presario sr1810nx and it freezes at the compaq startup screen. I cannot enter BIOS or do anything accept unplug it. Help!
ok whatdont you understand about KEY BORED NOT RESPONDING
how do i get into my bios on my Compaq Presario Media Center SR2011WM Desktop PC
×