Power button does not work - Canon PowerShot SD750 / IXUS 75 Digital Camera

Re connecting the wires may work without issues.

If the power button on your Nokia C200 is not working, there are a few steps you can try to troubleshoot the issue:

1. Check for physical damage: If the power button is damaged or broken, it may not function properly. Inspect the button for any visible damage or debris that may be preventing it from working.
2. Clean the button: If the power button is stuck or not responding, it may be due to dirt or debris lodged in the button. Use a small brush or toothbrush to gently clean around the button and see if this resolves the issue.
3. Check the button connections: If the power button is not working properly, it may be due to a loose connection or malfunctioning component. Check the connections between the power button and the rest of the device to make sure they are secure.
4. Reset the device: If the power button is still not working after trying the above steps, you may want to try resetting the device to its factory settings. To do this, go to "Settings," then "Backup and reset" and select "Factory data reset."

Not sure if you saw Tom's Guide
at Sharp lcd tv power button flashing

(1) 4tinyhearts said:
I unplugged the TV and held the buttons down and it continued to flash. I continued to hold down the two buttons and replugged it in again and it worked. TV back up and working.

(2) lastditcheffort said:
Unplugged it. After looking for a new tv online I decided to try getting it to work. So, plugged it back in and held down the power button, a red light came on, held down the power button again and an orange light came on, held down power button again and green light came on and tv powered on. This was simply a case of trial and success!

(3) Nateinportland said :
unplug, hold power button, plug in. If that doesn't work, unplug all the HDMI cables, unplug the power, hold power button, plug back in.

+power button damaged need to change it

Just what do you mean by Power Button not working? Is the Power Button depressed and won't return, is the button out and won't go in? Do you have power to the speakers? Or What?

First thing if there's a TV Button they pushing cause someone might of pushed the SAT or. DVD button. If that don't work check your battery's. some times I tap mine for hand hand lightly and then it works Good luck

look below the enter key one turbo key also available
if you want to use three of these buttons like power off,sleep,etc
press turbo key and then press one of these its really working and very quite

Amrit

I have a ip2600 that has had the waste ink absorber msg come up twice. After trying several recommended fixes involving pressing the Resume key twice then 4 times, etc., I've found the perfect solution. Start by cleaning the waste pads with tweezers, etc.
1. Press Power Off
2. Disconnect Power Cord
3. At SAME TIME, Press & HOLD Power Key while re-connecting Power cord
4. Release the Power button
5. Press the power button again
This will work!

Replace Monitor Power button or check the connector of the front panel with the main board of the Monitor and give a feedback to me

This also helped me. Thanks