Question about Akai CFTD2083 20 in. TV/VCR/DVD Combo

1 Answer

Problems with the tv coming on

I have the same problem as the one on the ad "I have the problem posted by another AKAI victim. The TV's power indicator is red, then green when the power is initiated but it immediately turns back red and the TV never turns on. What can I do to resolve this? The TV isn't 2 years old."

Posted by tazz_28 on

  • barnede Oct 05, 2008

    I have an Akai LCT3201AD. The TV will not power on. When in stanby mode, the red LED indicator is on. When you press the power buttion, the indicator goes green to indicate power is on, but immediately goes back to red and the TV never boots up.

  • jmd30701 Dec 15, 2008

    akai cft02085 combo will not come on with remote or power button. can hear a faint ticking sound coming from back inside of tv.

×

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 152 Answers

It seems like there's a problem with a component on the Power Supply of your TV or there's a problem with your Picture Tube. I don't recommend you working on TV's unless you know what you're doing since you can get badly shocked if you don't discharge the Ulter Cap on the Picture Tube. If you don't know what you're doing then I suggest you get it repaired by someone who knows what they're doing.

Posted on Jun 07, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is it a Fuse or the Power Supply


It's not the fuse. Chances could be your PSU

Oct 13, 2017 | Akai LCT3201AD 32 in. LCD Television

1 Answer

Need to program remote for akai


Hello
You want to programme your Akai TV with a universal remote control; I assumes, and posts this solution.
Three digit universal remote codes for Akai TV are:
002/ 0030
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand

Feb 03, 2012 | Televison & Video

1 Answer

My akai flat screen tv is not turning on. the red light at the bottom of the tv is on and when the tv comes on the red light turns green and in a few seconds the tv comes on, when i press the power button...


i have one of these akai 27 inch with dvd, i had a similar issue i found a power supply at auction and exchanged it and it works fine now, normally with this symptom your power supply is fualty. if the light goes green and you have no picture then you know other boards are fualty

Jun 04, 2010 | Akai LCT3285TA 32 in. LCD Television

1 Answer

Problems with the tv coming on


Most likely is a problem on the vertical circuit. In any event, did is a not a fix it yourself problem. You are going to need a tech. Sorry.

Nov 04, 2008 | Televison & Video

2 Answers

Akai LCT3701AD refuses to leave STANDBY mode.


The power supply on your LCD is defective. It does not provide the power needed to all the circuitry due to defective capacitors or other components.
You will need to replace the power supply or get it repair because these service parts are not longer being manufactured.
Good Luck.

Sep 19, 2008 | Akai LCT3701AD 37 in. LCD Television

1 Answer

The tv will power up but no picture I can here the fan on on the power light is green indicating i have power what can i do to fix this problem


please post the model number and I may be able to help you. Please respond to this same post so I will have acces to your symptoms when you post the model number of your set.

Jun 28, 2008 | Akai Televison & Video

1 Answer

Tv\DVD Wont turn on


Quizas el sistema de la vcr este fuera de tiempo,por causa de la banda del motor de carga el aparato tiene que ser abierto para ser reparado llevalo a un taller.

Mar 28, 2008 | Akai CFTD2083 20 in. TV/VCR/DVD Combo

1 Answer

Akai dlp


i have a similar tv, with 5 blinking red lights on the power off. is that a power board issue? (I see the small green light ionside the tv, flashing green.,,) the outer light stays red or flashed red when i power off. i replaced the fuses, still same issue.

Mar 18, 2008 | Akai PDP4294 42 in. EDTV-Ready Plasma...

1 Answer

Initial power-up


I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!

Tyler

Dec 17, 2006 | Akai LCT2060 Television

Not finding what you are looking for?
Akai CFTD2083 20 in. TV/VCR/DVD Combo Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Akai Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76396 Answers

Ekse

Level 3 Expert

13434 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you an Akai Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...