I am trying to change my bugaboo into a chair from bassinet but it wont fit i cant get the rings to fit over the bits at the bottom they dont seem to stretch accross can get on eon but not the other??
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
In previous posts I've said the Bugaboo gets an A for design, The wheeled board gets a B-. Your problem is you're trying to fit it with all four wheels still on the ground. Put to on it's side and you can the rotate the board further around to fit the clips. Go here to get Bugaboo's instructions For those yet to buy a wheeled board click on my name or picture and click on Tips. There is a better alternative to the Bugaboo board.
The answer is yes, the chassis prongs are the same size and spacing. The size of the seat and bassinet are different so the fabric sets are not compatible.
The 2 straps with the silver holes should be in line with the two pegs on the side of the frame. If yours are no where near eachother, you could have your frame backwards. I set my floor model up wrong and didn't know it until the Bugaboo Rep came in and turned the entire thing upside down and hooked the straps on those pegs. It is a tight fit getting those to hook. She had to put a little weight on the frame to bow it in just enough to hook those pegs.
You'll have to undo all the velcro attachments as well as the tether that snaps together behind the foot rest then slide the seat fabric out from the frame. You'll then have to attach the bassinet to the same frame using the velcro straps.
×