Looking to replace the cord insert posts on the base of a 12 cup faberware coffee pot. How do I take the base off to get to the posts? Thanks, Joe

You need a keepwarm element. Go to repairshack.com. Good luck. Ron

that would depend on the coffee, and how strong you like it.

as well as how large your standard cups are.

I use 1/4 cup of folgers classic blend for 4 'normal' cups of coffee. I also use an oversized camping mug - so 4 normal cups fills two of the mugs. - - - you may want to try 1 1/8 cup of coffee grounds in the filter if making a full pot.
regards,

I heaped teaspoon for every person + one for the pot

very simple to remember.

Please rate my help++++Thanks for using FIXYA

Hi, Farberware only makes 4-8-12 cup coffee pots and they all use the same manual. I have some. contact me through [email protected]. Ron

Hi.For filters go to eBay and search for Farberware coffee pot parts. For manual email [email protected]. Good luck Ron

Go to my eBay auction. look for Farberware coffee pot parts. They are use but you cannot buy a new one (Ron622c) Good luck. bobbyone

Hi. The model # you have a 12 cup China pot.You have to replace the base. Do you use a 3 wire cord or a 2 wire cord. I have the 2 wire base, 8.00 plus 3.00 Go to eBay (ron622c) in find member. bobbyone

Hi. Go to repairshack.con for parts. bobbyone

I am looking for an electric cord for a FABERWARE Vintage coffee pot, Model #325985 or 86. The plug in is 1-1/2" wide. If you can help me with this request, I would appreciate it.
Thanks
Wilkilene Smith

ok heres a simple fix if you dont have the money for replacement or cant find parts
J.B.weld from auto parts store this stuff if strong enough to fix a cracked engine block so im sure the pot can get fixed this way