Rcu 450 i have a rcu 450 universal remote, and a jvc tv .i lost my code book but with the code search it says it is 182. the on/off,channel and volume all work, but the menu dose not. i need the menu button to switch it so my dvd will play. any ideas?

Remote Control Support - RCA ' Made for Moments

www.rca.com/support-remotes

RCARemote Control Support. Select your Type of Remote. Remote Code Finder ...RemoteProgramming. Cable/Satellite Receiver Codes. Select Your Provider.

RCA Universal Remote Control- Target Programming ...

www.thompsontv.com/rcarc.html

RCA Universal Remote Control-Programming Codes. ... Universal Remote. The remotemay already be set up to operate your brand of TV, VCR, or Cable Box.

Program an RCA Universal Remote Without a "Code Search ...

www.wikihow.com > ... > TV and Home Audio > Television

wikiHowHow to Program an RCA Universal Remote Without a "Code Search" Button. Do you have an older RCA universal remote that you want to use, but it lacks a ...

The RCA DETK185R TV can be controlled with Universal Remote Controls. I tested several.
The best match was a 4 digit universal remote from GE. Model Number 10841. Code 1961 worked almost everything.
With a 5 digit remote from RCA, model number RCRN04GR, Code 12372 worked Power, Channel, Volume and Input.
A 3 digit remote from GE, model RC24912-B. Code 166 was able to control Power, Channel, Volume and Input.
An old 3 digit remote from RCA, model RCU-403A. Code 062 was able to control Power, Channel and Volume.
Most remotes from GE and RCA will use the same code numbers. So even if you have a different model remote from GE or RCA, these codes may work.
These codes should work with other TV models in this series from RCA, including Detk215r, Detk186r and Detk156r.

Look up code in book for your model and program it or do automatic code search.

Hi,

The codes for JVC TV to program universal remote are 159, 013, 012, 182, 054, 060, 065, 066, 067, 123, 157, and 158. This depends on the BRAND of the Universal Remote you are using. These codes are compatible with Innovage Universal Remote. For instructions on how to apply this, go to this link:
http://www.ubergizmo.com/2007/04/innovage-jumbo-universal-remote/

Thank youfor visiting FixYa! We answer yourconcerns promptly for FREE. Please spare a few seconds to click on YES buttonin return. Have a good one!

Codes for JVC 012-013-054-060-065-066-067-123-157-158-159-182.

The codes for JVC TV to program universal remote are
159, 013, 012, 182, 054, 060, 065, 066, 067, 123, 157, and 158.
You can check these codes one by one and for programming, get instructions from the given link:

Programming

• Press device and OK buttons at the same time [2.5 sec.] DEVICE LED turns on
  Input three digit code number....DEVICE LED blinks with each number entered
  Press DEVICE LED again it blinks twice and then turns off
  
  
• You can manually search for a code by having the TV turned on and use the up or down button on the remote..
  When TV turns OFF,,,,, that's the code
  
  

Try on of these codes
White Westinghouse 000, 001, 190, 191

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

i lost my book with my codes . can you tell me the correct code to my rca to my zenith television