There's a white line on the left side of the screen. It doesn't show up on the pictures on the computer but it stays on the screen.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

If you've ruled out that the source you're displaying from is good, I would contact vizio for a warranty repair

THIN COLORD LINES ON RIGHT SIDE OF SCREEN PICTURE IS FINE AN SOUND THANKS

mcdevito75 here, Press the SHIFT key, a screen should come up telling you too click on your user name, left lower side of screen. If this doesn"t work, press the yellow blinking light on the monitor see if picture comes back, then follow the directions. If this doesn"t work, shut computer down with switch on the computer itself. Hope this helps.

well, your camera's LCD has a dead row of pixles you cant fix that, you can try ignoring it, and if yo cant ignore it, then a specialist can probably replace the LCD

scane for virus and reinstall the operating system

That is actually the exact same thing I am experiencing but mine has grey lines on the display window. I was able to take photos to a grey screen connect it to my comp...low and behold my pics showed....I am furious....need some answers as I will never hear the end of it from my daughter.

Grrrrr

weelassy

horizontal lines can be caused by either a faulty grapchics card or a faulty monitor. try adjusting the screen refresh rate. if you are using a windows xp system goto

start>control panel>display>settings>advanced>monitor

then adjust the screen refresh rate and see if the horizontal lines disappear. if not, then you probably have a faulty graphics card or monitor.

I had a smililar problem after taking it apart i realised that i had screwed my mount skrews into the video main board and cracked it along with a few soldered wires, if you havent done any physical dammage to it try a firmware upgrade

Hi there

This problem can only be fixed properly by replacing the Mainboard.