Briel Chamonix es-35 espresso

It is possible that a regular rubber disc from a commercial machine might fit, check with the nearest espresso machine dealer.

http://www.coffeecrew.com/learning/186-the-salton-maxim-ex-450-espresso-experience

Pods are expensive. I buy espresso grind from my favorite local espresso shack and I take regular drip coffee filters and cut small discs from them to put in the bottom of the cup that holds the grounds (moisten first). It works great and keeps the finer grounds from clogging it up.

here is a generic manual link:
http://www.smithagy.net/BrielInstructionManual.pdf
if you want more specific to the chamonix please email:
[email protected] with your request.
Thank you.

You can try contacting the service center and getting their suggestions at:
Electra-Craft
ATTN: Steve
41 Woodbine St
Bergenfield NJ 07621
ph 201-439-1700
[email protected]

You can get any Briel part you need at:
Electra-Craft
41 Woodbine St
Bergenfield NJ 07621
phone 201-439-1700
fax 201-439-1701
[email protected]
www.electra-craft.com

You can get it at:
Electra-Craft
41 Woodbine St
Bergenfield NJ 07621
phone 201-439-1700
fax 201-439-1701
[email protected]
www.electra-craft.com

Contact Electra-craft.com..they are in New Jersey

Hi,
I work at Briel USA. Please send your email address to me requesting a manual for a Chamonix and I will send you one via pdf.
[email protected] office phone 770-509-3006
Also,you might find what you need at the Briel USA website at: www.smithagy.net click Briel.
Please let me know if you need anything else.
Thank you.
Best Regards,
Irene

HI,
You can order any Briel part you need at:
Electra-Craft
41 Woodbine St
Bergenfield NJ 07621
phone 201-439-1700
[email protected]
thank you.