I am unable to configure my wireless belkin N150 with MTNL router. I configured belkin with PPPoe. modem light on belkin still shows amber
As i understand you have a router provided by your ISP: MTNL, you need to configure the Belkin router in Dynamic mode and not in PPPoE. Then restart the devices by unplugging the power from MTNL router and Belkin. Wait for 20 secs, then power up MTNL router 1st, wait for all lights to get steady and finally power up the Belkin wireless router. Then you will find the modem and internet light lit up properly.
For any further clarifications, revert!
Thanks and regards,
Arvind
but the mtnl modem is configured with PPPoe settings. shouldnt belkin wireless be setup with PPPoe as well?
All the modems are configured with PPPoE or PPPoA. But it all depends on how you connect and go online. Let me be very simple, if you connect the computer direct to modem and go online right away, then Belkin needs to be configured as Dynamic but if you got a username and password from MTNL and if you use something like a dial-up, as in, 1st authenticate your user name and password n then go online. Only in this special case, Belkin needs to be configured in PPPoE mode.
Again, for further clarifications, revert!
Thanks and regards,
Arvind
×
1,515 views
Usually answered in minutes!
×