I am unable to use the rw's but the r works fine... Is there any reason for this, I have read through the manual and there is no mention of a problem.
thank you
James
[email protected]
DVD-R discs can be used with no preparation, but a DVD-RW must be initialised before it can be used for the first time.
You may also have to initialise a DVD-RW if you get the message "UNABLE TO RECOGNIZE THE RECORDING MODE OF THE DISC" .
Also, make sure you always use DVD "minus" format discs - the DC210 will not work with any DVD "plus" format discs.
When you initialise the disc you will be asked to chose between Video mode and VR mode. Most DVD players will play a Video mode disc, but a VR mode disc can be edited with the camcorder. My preference is Video mode - I can then play on a DVD player and edit on a PC.
Don't forget to rate this solution once you've tried it !
400 views
Usually answered in minutes!
I have the same problem, but I can't figure out how to initialize the disc. They say that screen should automatically come up when you put in a new disc DVD-RW, but it doesn't. All I get is "Cannot recognize disc". Help
×