Delph na10000 looking for a charger cord or any information on this unit. cant find the on button. thanks in advance CHAS

I would check company web ste for information on the unit for a part number. Then check Ebay or any parts supplier that pops up on web. Good luck, Chas

You need a UNIVERSAL POWER CORD, NON-POLARIZED
you can buy at

http://www.allelectronics.com/make-a-store/item/LCAC-400/2-CONDUCTOR-POLARIZED-CHEATER-CORD/1.html
see these cables has round and square ends.(click Zoom and Look the picture)

If the hole in charger have two round corner buy
http://www.allelectronics.com/make-a-store/item/LCAC-390/6-2-COND.-UNIVERSAL-POWER-CORD-NON-POLARIZED/1.html

Is important for people who share their knowledge, know your comments.
If the answer is helpful, rate my answers

The store that you purchased the unit from should have replacement chargers. If they don't, any car accessory store that sells GPS units should be able to supply you with a replacement. Failing that you can always order on from the Garmin website:

https://buy.garmin.com/shop/

You can choose your model number from the drop down menu, then type in vehicle power cord for what you are looking for. They will give you a picture and price for the cord. You can then choose how you want them to ship it to you.

Thank you for the opportunity to assist you in resolving your issue. Should you need further information or assistance please do not hesitate to let us know.

I have the same situation, how do I ge the shell apart.
Chas

have you got it plugged in too charger, power button wont function if no charge in battery..... easy to forget when your freaking out about your 3k lap top... goodluck Chas

Already posted the answer to a similar question on this forum.. look for the answer

You can buy a new car adapter by clicking on the hyperlink:
buy replacement car adapter power charger cord for DUAL XDVD181

usually when cords are wrapped around the base of the plug, it creats a short in the cord. And most people *do* wrap cords around objects to create convienent space. basicly it was the cord not the system.

I had the same problem and was able to fix it by finding a replacement cigarette lighter power cord with the same voltage and polarity. Input to cord is 12Volts. Output to GPS is 5Volts, with a positive center post.

larryjm123

PS I need an instruction book and disks (or disk copies) if you know where I can get them. Delphi no longer has them.

My Nikon MH-53 takes the same lead as my Panasonic charger so I think the problem is in your charger.