If you've replaced your original drive with a new one, you will have to re-install the operations system (Windows) on your new drive.
If you're installing a second hard drive then
1) Set the jumper on the back of your first drive to master and the jumper on the back of you new drive to slave.
2) If the IDE connectors are all on one cable, connect one end to ide0 on you mother board, at the other end connect the end IDE connector to you current C drive and the connector in the middle to you new D drive.
With luck when you re-boot your pc should find the new drive.
161 views
Usually answered in minutes!
×