I read your post about how to fix the paper jam problem on the SCX. I looked for sensor but could not find any. Are those easy to repair or you need to open the printer? I contacted Samsung and they are going to send a new printer since they don't seem to bother trying to fix it.
Should I give up and just get the new printer? The problem being I need the printer...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I suppose that the exit paper sensor in fusing section is broken (ussually when you pull out paper jam you can brake this little black or blue pawl). You can order and buy only this paper sensor pawl (very cheep).
pifonski
Good Day Sir, when paper jam occurs, Paper jam appears on the display.
MessageLocation of Jam [Paper Jam 0] - In the paper input tray [Paper Jam 1] - In the fuser area or around the toner cartridge In the manual feeder [Paper Jam 2] - In the paper exit area
Good day, Check the table below about the problem of paper jams.
Displayand Meaning
[Paper Jam 0] - Paper has Jammed in the feeding area of the paper input tray. [Paper Jam 1] - Paper has jammed in the fuser area or in the manual feeder. [Paper Jam 2] - Paper has jammed in the paper exit area.
I had the same problem, what you need to do is ruffle up the paper abit dont put it in so neat , for some reason the sensors are notrecongnising the paper (dont know why) i have used the same before...
After the fuser, problably near the exit rollers, there is going to be a switch/sensor, that has a problem. It could be hung up, out of position, ect, but you have a typical exit sensor problem.
It would probably be easier if the fuser was out of the machine. We are speaking about a fuser jam, correct?
×